[R-1051] Complexity of the 1051

[Cecil Acuff]

Hi Group,

        I have no experience with the transmitter side of this duo....I have
been asked several times about expanding into the repair of the complete
URC-35 but don't know how I would find the time and needed cables, manuals
etc to get it kicked off at this point.  Maybe in the future. The R1051
receiver work is keeping me quite busy.....I also seem to learn something
new about these things quite regularly!

What is the number on the PA tube...I could at least do some research on
that....

Cecil....


----- Original Message ----- 
From: "randy zelick" <zelickr at pdx.edu>
To: <r-1051 at mailman.qth.net>
Sent: Tuesday, September 16, 2003 10:05 PM
Subject: Re: [R-1051] Complexity of the 1051


> Hello CA,
>
> Your email about R-1051 repair caught my interest.
>
> I have a URC-35 that I intend to get going. I have a manual, the RT and
> amp, but no cables. I bought the connectors from Wm Perry and now have
> to make up the cables.
>
> Do you have any advice before I get started?
>
> I have been told that the PA tube is impossible to find and so I should
> pray that the one in my amp is good. It is also unclear if the set will
> run without the matching antenna tuner (which I don't have).
>
> Thanks,
>
> =Randy=
>
> -- 
> R. Zelick email: zelickr at pdx.edu
> Department of Biology voice: 503-725-3086
> Portland State University fax:   503-725-3888
>
> mailing:
> P.O. Box 751
> Portland, OR 97207
>
> shipping:
> 1719 SW 10th Ave, Room 246
> Portland, OR 97201
>
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051
>