[R-1051] Power Connector

[Cecil Acuff]

Greetings,

        The connectors I purchased were made by Amphenol....they were bought
through Allied electronics.

The Audio connectors are actually 2 pieces...the connector and the strain
relief that screws onto the back of the connector.

MFG P/N 97-3106A-10SL-4S  Connector    Allied P/N    714-4004
MFG P/N 97-3057-1004           Strain relief    Allied P/N    714-2502

The Power connectors are 3 individual pieces...the connector shell, the
connector insert and the strain relief.

MFG P/N 97-3106A-16S     Connector shell      Allied P/N    712-2055
MFG P/N 97-16S-5S            Connector insert    Allied P/N    712-2237
MFG P/N 97-3057-1008       Strain relief            Allied P/N    714-2506

At the time they were not able to provide a part number that included all
the parts so I had to order each separately.  Things may have
changed...that's been probably 3 years ago.  These are the same parts used
by the military...most of the numbers were pulled from a set of connectors I
had that came with one of my radio's.  The are OD green anodized...of course
they may all be that way...I'm not sure.

A warning...they are not cheap either...you should expect a full set of
connectors (2 audio 1 power) will cost you around $60 shipped....that was
based on prices 3 years ago...I haven't checked the prices lately..I would
expect they have gone up...

Hope that helps...

Cecil...


----- Original Message ----- 
From: "Tom Norris" <r390a at bellsouth.net>
To: <r-1051 at mailman.qth.net>
Sent: Wednesday, October 22, 2003 7:31 AM
Subject: Re: [R-1051] Power Connector


> >I'm looking for the power connector for an R-1051. Found in the archives
> >back in May 2002 that Cecil has the part number to get them from Allied.
> >Don't know Cecil's email so I'm requesting here. Cecil, can you send me
that
> >part number, also, might you know were to get connectors for the USB and
LSB
> >jacks?
> >
> >Thanks
> >
> >John Schmitz
> >
>
> John,
>
> The power connector you need is a MS3106A-16-5S
> I don't have the part number for the 2 pin audio, so hopefully
> Cecil will chime in with that.
>
> I usually buy my cannon connectors from either Allied or a
> local outfit www.randolphandrice.com - might try them as
> well, there is an email link on the page for Mike Deal who
> usually orders my connectors for me. They do mail order
> and are a bit less than Allied. There is also the William Perry
> Company that many folks rave about when buying MS type
> connectors, but I have never bought anything from them.
>
> Tom KA4RKT
> Manchester, TN
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051
>