[R-1051] WTB R-1051E manual

[Cecil Acuff]

Tony it's not clear who you want to call you...

Francesco who is looking for a G sixpak schematic

Lee who is looking for a E manual

or me who responded to both over the last several hours...

If it's me I'll need your number...not sure I still have it!

Cecil...


----- Original Message -----
From: Tony Snider <trsnider at mindspring.com>
To: <r-1051 at mailman.qth.net>
Sent: Saturday, February 01, 2003 3:20 PM
Subject: Re: [R-1051] WTB R-1051E manual


> we got that here!! call me today, Want to ask you about fixing something I
> just got
> ----- Original Message -----
> From: "Francesco Ledda" <frledda at attbi.com>
> To: <r-1051 at mailman.qth.net>
> Sent: Saturday, February 01, 2003 1:19 PM
> Subject: RE: [R-1051] WTB R-1051E manual
>
>
> > Hello Cecil,
> >
> > Do you have a schematic for the six-pack for the G version?
> >
> > Francesco Ledda
> >
> > -----Original Message-----
> > From: r-1051-admin at mailman.qth.net
> > [mailto:r-1051-admin at mailman.qth.net]On Behalf Of Cecil Acuff
> > Sent: Saturday, February 01, 2003 10:48 AM
> > To: r-1051 at mailman.qth.net
> > Subject: Re: [R-1051] WTB R-1051E manual
> >
> >
> > I didn't answer all your question I discovered after going back...sorry
> > about that.
> >
> > There were minor differences between B through H models...in their
> > design...I think the basic Performance Metrics didn't change....they all
> > tuned the same frequency range...all had the same basic stability specs.
> and
> > all had the same sensitivity specs.
> >
> > The D and newer models had the ability to select different AGC timing
> > settings from the front panel....also some of the metering functions
were
> > changed...they added a multifunction meter with a switch to select the
> > functions.  There were a few other changes in the G and\or H model but
> they
> > were minor as I understand it.  On the inside, the synthesizer or
Six-pack
> > as it is called was updated to use more commonly available technology.
> The
> > Audio\IF modules in the D through H models are a little different to
allow
> > the AGC timing settings to be made but seem to work in the earlier
models
> > but not vise versa.  Plain through C Audio\IF modules will not function
> > fully in the later models...because they lack the ability to change AGC
> > timing.
> >
> > Hope that helps...
> >
> > Cecil Acuff
> >
> > www.r1051.com
> > chacuff at cableone.net
> >
> > ----- Original Message -----
> > From: Lee <vulcan at nextcentury.com.au>
> > To: <r-1051 at mailman.qth.net>
> > Sent: Friday, January 31, 2003 9:07 PM
> > Subject: Re: [R-1051] WTB R-1051E manual
> >
> >
> > > Hello All
> > > Thks to those who replied. Tell me what differnce is there between the
> > > various model of R-1051 receivers,  models B thru H, perfermance wise.
> Do
> > > they all use the same turret module hence the front end is the same on
> all
> > > these models???
> > >
> > > Lee.
> > >
> > >
> > > _______________________________________________
> > > R-1051 mailing list
> > > R-1051 at mailman.qth.net
> > > http://mailman.qth.net/mailman/listinfo/r-1051
> >
> > _______________________________________________
> > R-1051 mailing list
> > R-1051 at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/r-1051
> >
> >
> > _______________________________________________
> > R-1051 mailing list
> > R-1051 at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/r-1051
>
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051