[R-1051] R-1051's FS

[Matt Parkinson]

Yes that is true but the belts can be had by a company in NY I have 3 spares
.
I believe that the belts cost 15.00 not to bad and really not to bad to
install if you have done it a few times.
I am completely stumped on the one I am trouble shooting at this point.
I have 2 of them one is working ok but not really well I think it has some
type of AGC problem but is working at least.
The other one I just can't figure out yet might be some type of wiring
problem is just motor boats so to speak .
All modules have been swapped with the working one and they all work in the
other receiver.
The funny part is even with the modules swapped from bad receiver to good
receiver and I do mean ever module the good receiver displays some type of
AGC problem. But I not to concerned about the AGC problem right now I just
want to get the none working one working.
The non working receiver looks brand new inside and out and yes I had to
replace the belt it didn't have one .
I have aligned the synthesizer with the belt and switch assembly to no avail
I have made sure it ohms out just like the working one but all it does is go
pop pop pop  and that is a slow pace not a real fast pace.
 If by any chance you have any Idea please let me know I figure there are
plenty of these receivers out there in the same boat.
By the way most of the modules are really easy to fix they have at least 100
2n2222 transistors and are really easy to find and cheap to buy.
Matt

-----Original Message-----
From: r-1051-admin at mailman.qth.net [mailto:r-1051-admin at mailman.qth.net]On
Behalf Of Tony Snider
Sent: Saturday, November 30, 2002 8:06 PM
To: r-1051 at mailman.qth.net
Subject: Re: [R-1051] R-1051's FS

that unit is a marine corp. gem not navy but I am familiar with them but not
like the 1051s but you are right the construction is similar I understand
the band switching belts are the main drag on them
----- Original Message -----
From: "Matt Parkinson" <mparkinson1 at socal.rr.com>
To: <r-1051 at mailman.qth.net>
Sent: Saturday, November 30, 2002 11:02 PM
Subject: RE: [R-1051] R-1051's FS


> Tony if that is true about all the work you have done on govt  receivers
and
> transmitters do you have any experience on the R 1490 receiver made by
> National that is a small version of the 1051 series receivers  If so I
could
> use some help on this gem .
> Matt Parkinson
>
> -----Original Message-----
> From: r-1051-admin at mailman.qth.net [mailto:r-1051-admin at mailman.qth.net]On
> Behalf Of Tony Snider
> Sent: Saturday, November 30, 2002 1:54 PM
> To: r-1051 at mailman.qth.net
> Subject: Re: [R-1051] R-1051's FS
>
> Cecil,
> we ought to work together on some of this stuff I have about 100 radios
here
> of various types and about 1000 modules, as soon as I get the new shop
built
> 5000Sq ft We are going to start advertising to do radio and module
overhaul
> for the govt, I did a bunch for the navy last year as a subcontract. and
> some Collins synth. modules for an overseas gov a month ago, will be
putting
> together a site with all the radios we can support and a list of their
major
> boards, modules, etc. we are set up to overhaul most any navy or air force
> transmitters as well.
> tony
> ----- Original Message -----
> From: "Cecil Acuff" <chacuff at cableone.net>
> To: <r-1051 at mailman.qth.net>
> Sent: Saturday, November 30, 2002 1:13 PM
> Subject: Re: [R-1051] R-1051's FS
>
>
> > Happy Holidays Tony!
> >
> > Cecil Acuff
> >
> > www.r1051.com
> >
> >
> > ----- Original Message -----
> > From: Tony Snider <trsnider at mindspring.com>
> > To: <r-1051 at mailman.qth.net>
> > Cc: <Radiograveyard at aol.com>
> > Sent: Saturday, November 30, 2002 3:07 AM
> > Subject: [R-1051] R-1051's FS
> >
> >
> > > Hello,
> > > Need you guys to be part of the new garage building project!! have for
> > sale
> > > R-1051 straight, R-1051B, R-1051D, R-1051G and R-1051H all sets fully
> > tested
> > > and guaranteed. all have small scratches and dings here and there from
> > being
> > > heavy and handled (nothing major or out of the ordinary) set covers
2-30
> > > mhz, decade tuning, very sensitive, has modes LSB, USB, CW, AM, FSK,
> ISB,
> > > all solid state except 2 tube front end, rackmount, 115vac input, all
> sets
> > > include desk mount,  copy of OPERATORS instructions (not full manual)
> > power
> > > cord extra heavy duty shipping box and 2
> > > audio connectors.
> > >
> > > FULL REFUND OF PURCHASE PRICE IF YOU ARE NOT HAPPY
> > >
> > > R-1051 straight      450.00   very good condition except both panel
> lamps
> > > out
> > >
> > > R-1051B                550.00   very good condition except both panel
> > lamps
> > > out, includes  FULL
> > ORIGINAL
> > > MANUAL
> > >
> > > R-1051D                599.00   very good condition
> > >
> > > R-1051G                 699.00   very good condition, has synthesized
> > > six-pack, some decent touch
> > > up paint on front panel
> > >
> > > R-1051H                 899.00   excellent condition, synthesized
> > six-pack,
> > > last model of R-1051
> > > made
> > >
> > > ALWAYS LOOKING FOR 70'S OR LATER MIL RADIO, SURVEILLANCE, RADAR,
> > > COUNTERMEASURES, MANUALS IF YOU HAVE SOME TO TRADE!!
> > > Thanks
> > > Tony
> > > 757-270-8424
> > >
> > >
> > > _______________________________________________
> > > R-1051 mailing list
> > > R-1051 at mailman.qth.net
> > > http://mailman.qth.net/mailman/listinfo/r-1051
> >
> > _______________________________________________
> > R-1051 mailing list
> > R-1051 at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/r-1051
>
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051
>
> _______________________________________________
> R-1051 mailing list
> R-1051 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/r-1051
>

_______________________________________________
R-1051 mailing list
R-1051 at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/r-1051