[QRP] Which SWR/PWR meter for 1 Watt QRP?

[Kr01a at aol.com]

Oak Hills Research has an excellent meter with three
scales 0 to 10 watts, 0 to 1 watt and 0 to 100 mw.  Can
get as a kit or as an assembled unit. Unit is the WM-2
 
72, Mac, kr0i
 
 
In a message dated 8/19/2010 11:38:06 P.M. Central Daylight Time,  
kd5hcl at yahoo.com writes:

Are  there any swr/pwr meters optimized for use at the 1 watt level? I have 
a meter  which has a low setting of 10 watts, however its really useless at 
a watt.  Even among the cb (which is max 5w , right?) I dont see anything 
less than 10w  full scale(which makes 1w look like a very small deflection 
due to the  logarithmic scale)

If there are no 1 or 2.5 watt full scale meters  commercially made, has 
anyone seen a QST/Handbook project for building  one?

73,
Glenn

-.-



______________________________________________________________
QRP  mailing list
Home: http://mailman.qth.net/mailman/listinfo/qrp
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:QRP at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html