[PVRC] K3 VFO A and VFO B linked - Help

[Henry Pollock - K4TMC]

Mark,

Thanks! Problem solved. My Rev D1 of the K3 manual did not list that
control in the Config Listing.

73,
Henry - K4TMC


On Fri, Oct 3, 2025 at 6:11 PM Mark - K4SO <mark at k4so.com> wrote:

> Henry,
>
> Check CONFIG (Press MENU), User VFO B knob to go to VFO LNK. It should be
> OFF (rotate VFO A knob).
>
> *73, Mark - K4SO www.k4so.com <http://www.k4so.com>*
>
> On 10/3/2025 5:41 PM, Henry Pollock - K4TMC wrote:
>
> Getting ready for the CA QSO Party and discovered that the reliable old K3
> #98 is sick. So pulled the spare K3 #5573 out of storage and started
> checking it out.
>
> I find that VFO A is somehow linked to VFO B, such that turning the main
> knob controls both VFO A and VFO B. I can change VFO B separately with the
> B knob.
>
> There is no 2nd (SUB) receiver in the rig.  The general coverage board is
> installed. Split is off.
>
> Never had this problem with #98. What am I missing?
>
> 73,
> Henry - K4TMC
>
>
> ______________________________________________________________
> PVRC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/pvrc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:PVRC at mailman.qth.net <PVRC at mailman.qth.net>
> Message delivered to mark at k4so.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>