[PVRCNC] Re: [PVRC] Antenna Switch Manual

[Ken Claerbout]

Bob - I have a Heathkit SA-1480 control box which was 24 VDC if that helps
any.  I modified it for 12 VDC to drive an old DX Engineering switch I'm
using on my beverages.
In any event, you should be able to compare positions 3 & 4 with the voltage
from a good position ( 1 or 2) to determine if the switch box is working.
>From there it's just a matter of working your way out to the relays.  Good
luck!

73
Ken K4ZW
----- Original Message ----- 
From: "Bob Lukaszewski" <k4ha at nc.rr.com>
To: "PVRC" <pvrc at mailman.qth.net>; "PVRC NC" <pvrcnc at mailman.qth.net>
Sent: Sunday, January 01, 2006 10:55 AM
Subject: [PVRC] Antenna Switch Manual


> Does anyone have a Heathkit Manual for an HD-1481 4 antenna remote
> switch.  Very similar to the RCS-4.  I either have a control box problem
> or a bad relay on the tower piece.  Does anyone know what voltages are
> on the cable in each position.  Seems I have nothing on the cable in
> position 3 or 4.
> My 80M inverted V (pos 1), and the 40m beam (pos 2) work great, post 3
> the tri bander has high swr.  Any help would be greatly apreciated, or a
> copy of a manual... I can copy it if you want to send it.. Ill pay
> postage.  Thanks and HNY
>
> Bob K4HA
>
>
> _______________________________________________
> PVRC mailing list
> PVRC at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/pvrc
>