[PVRCNC] Tower Project reference site

[Bill Hider, N3RR]

Dan,

Reminder - look through my website if you're
going to put up a tower.  It's there for that purpose.

Even though your plans don't exactly match what I did 12 years ago,
there's lots of food for thought on the site.

www.erols.com/n3rr

73,

Bill, N3RR

-----Original Message-----
From: pvrc-bounces at mailman.qth.net
[mailto:pvrc-bounces at mailman.qth.net]On Behalf Of N3ND at aol.com
Sent: Monday, July 05, 2004 1:23 AM
To: pvrc at mailman.qth.net; pvrcnc at mailman.qth.net
Subject: [PVRC] Tower Project


PVRC Members:

I finally have my property cleared to accept a tower.  Therefore, before I
purchase all new stuff, I'm looking to you for help with this project.  The
following itemized list is a start on what is needed (as I do have some
minimal
early procurements).  Please check your back yards / basements / sheds /
garages
to see if you can help me out.

Many thanks!

Regards,
Dan -- N3ND

     PARTS NEEDED FOR TOWER PROJECT

QTY    Description / Part number
 8            45G 10' sectons
 1            45AG4 Top Section
 2            GA45GD Guy Brackets
 1            BPC45G Base plate with pier pin
 2            AS455G Accessory Shelves
 2            TB-3 Thrust Bearings
500'        HPTG40001 Phillystran guywire
12           PLP2739 Big Grip (4000) for Phillystran
12           CL37675 Thimbles (for Phillystran)
12           H164 End Caps (for Phillystran)
12           1/2" Shackles
12           5/16" Thimbles (for 3/16" EHS)
 5            3/16" EHS Guy Grips

 5             Mast Steps
21'           Chromalloy Mast (.18" )
 1             Loos PT-2 Tensioner




_______________________________________________
PVRC mailing list
PVRC at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/pvrc