[PVRCNC] Relay

Sun, 12 Jan 2003 19:59:53 -0500

Thanks Jim, Tom, and Brian.

Alas, I check RS and the physical dimensions are wrong.

Brian has refered me to http://www.elexp.com 

which looks promising.

73, Howie

Jim Jordan K4QPL said the following on 1/12/03 11:40 AM:

  Radio Shack. I bought several off the shelf at the local store for use in my
SO2R box and audio switch. No problems at all.  They have both the regular
DPDT and fast reed relays. Don't know exact resistance however. Alan, KO7X
could probably check for you.

Jim

----- Original Message -----
From: "Howard Hoyt" <[email protected]>
To: <[email protected]>
Sent: Sunday, January 12, 2003 3:51 PM
Subject: [PVRCNC] Relay

    Anyone know of a good source for PC board sized relays ?

My LK500ZC blew a tuned input 12V DPDT with std sensitivity coil (approx
280 ohm)
and my normal source (All Electronics) discontinued item 12V-24 that was
what I needed.

Thanks,

Howie

--
Howard Hoyt N4AF
http://www.qsl.net/n4af
Bluebird Trail
Blounts Creek, NC
27814

_______________________________________________
PVRCNC mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pvrcnc

_______________________________________________
PVRCNC mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pvrcnc

-- 
Howard Hoyt N4AF
http://www.qsl.net/n4af
Bluebird Trail
Blounts Creek, NC
27814

--- StripMime Report -- processed MIME parts ---
text/html (html body -- converted)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---