[Pro2006] help with 2006 /opto

Thu, 24 Oct 2002 19:32:11 -0400

---> Here is my  reply to what intoodeep wrote 10/24/02 7:54:46 PM

But your software is saying that the channel is active? Well first, put
those frequencies that are showing active into your pro-2006 manually and
scan them, see if they actually are active that way. Make sure you have your
squelch set as low as you can incase they are weak so that they will stop
the scanner

----------------------- Original Message ------------------------------

yes no audio or noise
how can i trunk track with my scanner?
----- Original Message -----
From: "radionut" <[email protected]>
To: <[email protected]>
Sent: Thursday, October 24, 2002 2:23 PM
Subject: Re: [Pro2006] help with 2006 /opto

> ---> Here is my  reply to what intoodeep wrote 10/24/02 6:57:36 PM
>
> Hi, when you say you are not hearing anything is the squelch breaking and
no
> audio, or noise?
>
> Mike
>
> ----------------------- Original Message ------------------------------
>
>
> Hello guys,  I have a pro 2026 with opto (full) and i use the probe v7.0
version. I'm getting active freqs. in the 800MHz but dont hear anything.  I
would like to setup my scanner to be able to trunk and decode signals.  I
have a data slicer and i'm about to do the discriminator tap mod. Is this
going to help me at all in being able to listen to trunked freqs. Is there
anything I can do.
> I have been around not too long to be considered a professional but also
not a newbie.
> My goal here is to be able to listen to trunked freqs.
>
> Thanks in advance guys.
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
>
>
> [Some portions of this message may have been removed]
>
> --------------------- Original Message Ends ------------------------
>
>
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
>

_______________________________________________
Pro2006 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pro2006

[Some portions of this message may have been removed]

--------------------- Original Message Ends ------------------------