[Pro2006] help with 2006 /opto

Thu, 24 Oct 2002 18:29:10 -0400

---> Here is my  reply to what intoodeep wrote 10/24/02 8:03:36 PM

No, you need one scanner with a discriminator tap to feed your slicer (and
the computer) and you need one computer controlled scanner to track the voice
activity.

You can use Trunker with one computer (and discriminator tap) to display the
information in Trunker from the control channel but you need the second
scanner (that is computer controlled) to follow the voice traffic.

----------------------- Original Message ------------------------------

so i need two pc controlled scanners?
----- Original Message -----
From: "radionut" <[email protected]>
To: <[email protected]>
Sent: Thursday, October 24, 2002 2:27 PM
Subject: Re: [Pro2006] help with 2006 /opto

> ---> Here is my  reply to what intoodeep wrote 10/24/02 6:57:36 PM
>
> Yes, if you have a working slicer and get the Trunker softrware you should
> be able to decode the control channel of the trunked systems. You will
need
> a second scanner (with Opto board) or othre computer controlled scanner to
> follow the voice on the trunked systems.
>
> ----------------------- Original Message ------------------------------
>
>
> Hello guys,  I have a pro 2026 with opto (full) and i use the probe v7.0
version. I'm getting active freqs. in the 800MHz but dont hear anything.  I
would like to setup my scanner to be able to trunk and decode signals.  I
have a data slicer and i'm about to do the discriminator tap mod. Is this
going to help me at all in being able to listen to trunked freqs. Is there
anything I can do.
> I have been around not too long to be considered a professional but also
not a newbie.
> My goal here is to be able to listen to trunked freqs.
>
> Thanks in advance guys.
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
>
>
> [Some portions of this message may have been removed]
>
> --------------------- Original Message Ends ------------------------
>
>
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006

_______________________________________________
Pro2006 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pro2006

[Some portions of this message may have been removed]

--------------------- Original Message Ends ------------------------