[Pro2006] Cable for Trunker / Probe
radionut
[email protected]
Mon, 21 Oct 2002 00:30:12 -0400
--> My reply to what Len G. Carpenter wrote 10/20/02 11:14:55 PM
You know, if anyone wants any of the information I will give it to them
I don't know what your problem is with my setting up my page the way I like
it?
Someone once told me when you try to do something nice, someone will shove
it down your face. I guess they were right
I just wont post any more information so you don't have to loose sleep
----------------------- Original Message ------------------------------
Don't let the page run the scripts then it will go there.
Glenn Little wrote:
> He has done something, because the link will take you to the main page not
> to linked page. You have to hunt and peck to attempt to find the page that
> you attemped to direct us to.
>
> 73
> Glenn
> WB4UIV
>
> At 11:45 PM 10/20/02 -0400, you wrote:
> >Why do you think the link will not work? Have you put code on the page to
> >stop it
> >from working?
> >
> >
> >radionut wrote:
> >
> > > --> My reply to what Len G. Carpenter wrote 10/20/02 9:29:59 PM
> > >
> > > I have not changed anything. The older Netscape has been driving me nuts
> > > with a couple people and I don't know what the answer is yet, I will keep
> > > looking for the answer. I have not change anything but find it interesting
> > > that it worked that time for you. I am glad it did.
> > >
> > > I am not a pro at websites, learning every day. The website is simply a
> > > exercise in my learning html and a way to share information on things that
> > > are of interest to me so I really do not know what it is in the older
> > > Netscape that is causing the problem but I will keep looking
> > >
> > > I don't think the link you gave will work
> > >
> > > Mike
> > >
> > > ----------------------- Original Message ------------------------------
> > >
> > > Ok so what has now changed on your page to make it work in netscape 4.79?
> > >
> > > Anyone looking for the info on the cable can go direct to this page for it.
> > >
> > > http://miked2000.home.mindspring.com/interface.htm
> > >
> > > radionut wrote:
> > >
> > > > --> My reply to what Len G. Carpenter wrote 10/20/02 9:01:16 PM
> > > >
> > > > Hi len, I have seen that problem with the older versions of Netscape and
> > > > think it ties into a setting or something in Netscape. I have been
> > trying to
> > > > track the problem down but there is nothing on my page that should
> > make that
> > > > do it.
> > > >
> > > > The link to the cable information is in "The Work Bench" menu and in the
> > > > "Probe" menu
> > > >
> > > > Mike
> > > >
> > > > ----------------------- Original Message ------------------------------
> > > >
> > > > radionut, you should be getting after earthink and ask them why your
> > page does
> > > > not work with netscape 4.79, it says page not loaded but damn it does
> > load the
> > > > back ground or is it just your webpage, something that you want done that
> > > > netscape won't let you do?
> > > >
> > > > Also why not provide a direct link to the page you are talking about,
> > I see no
> > > > link on that page to the cable, I know any webpage I have made is not
> > perfect
> > > > but I do know that a person should not have to hunt through a site to
> > find a
> > > > page or that when I post a page I should at least post the page I
> > want a person
> > > > to go to and not just post the site and tell people its there go find
> > out where.
> > > >
> > > > Cheers
> > > >
> > > > Len
> > > >
> > > > radionut wrote:
> > > >
> > > > > There was a good discussion in this group about problems getting
> > Trunker /
> > > > > E-Trunker and Treport to run from under Windows on some computers. It
> > > > > expanded to discuss the fact that if you have one serial port on your
> > > > > computer (like I do on my notebook) and you use a USB / Serial
> > adapter that
> > > > > it (the adapter) will not work from DOS to run your tracking scanner.
> > > > >
> > > > > Power management issues were discussed but did not seem to cure the
> > problem
> > > > > for everyone. These software programs do run much better from DOS
> > as does
> > > > > the popular Probe scanner control software.
> > > > >
> > > > > I set out when I found some time to build a computer cable that
> > would run
> > > > > both my Pro-2006 with Opto 456 board and my slicer on one cable.
> > This would
> > > > > take care of these problems mentioned above and let Trunker /
> > E-Trunker run
> > > > > from DOS and still control the tracking scanner. This would avoid
> > the issue
> > > > > of having two computer cables, the usb adapter as well and let you
> > run with
> > > > > one cable.
> > > > >
> > > > > I found some information on Bill's
> > webpage (http://www.ulster.net/~petrow/)
> > > > > about building just that kind of computer cable. I laid one out in
> > a drawing
> > > > > and built it. The cable worked fine but I also run Probe software
> > most of
> > > > > the time on that same scanner and it did not work with the built
> > cable. I
> > > > > wanted to only have the one cable so I laid out and made a drawing of a
> > > > > cable that will work with both Trunker and with Probe using the
> > same cable.
> > > > >
> > > > > I put some pictures and the information on a webpage for those of
> > you who
> > > > > said you were having the same problem and trying to find a way to work
> > > > > around it.
> > > > >
> > > > > You can also get there from either the Probe Page (from the Scanner
> > / SWL
> > > > > menu) or from The Work Bench page on my main website.
> > > > >
> > > > > http://miked2000.home.mindspring.com/radioindex.htm
> > > > >
> > > > > Hope this help some. If you have any questions or need more
> > information let
> > > > > me know. I have built this cable and tested it with my notebook, it
> > works
> > > > > fine. This idea can be used with other slicers / scanner set-ups as
> > well.
> > > > >
> > > > > Mike
> > > > >
> > > > > For Scanner, Ham and SWL in the Omaha Metro Area
> > > > >
> > > > > http://www.qsl.net/ku4zd/scanning.html
> > > > >
> > > > > _______________________________________________
> > > > > Pro2006 mailing list
> > > > > [email protected]
> > > > > http://mailman.qth.net/mailman/listinfo/pro2006
> > > >
> > > > _______________________________________________
> > > > Pro2006 mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/pro2006
> > > >
> > > > [Some portions of this message may have been removed]
> > > >
> > > > --------------------- Original Message Ends ------------------------
> > > >
> > > > _______________________________________________
> > > > Pro2006 mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/pro2006
> > >
> > > _______________________________________________
> > > Pro2006 mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/pro2006
> > >
> > > [Some portions of this message may have been removed]
> > >
> > > --------------------- Original Message Ends ------------------------
> > >
> > > _______________________________________________
> > > Pro2006 mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/pro2006
> >
> >
> >_______________________________________________
> >Pro2006 mailing list
> >[email protected]
> >http://mailman.qth.net/mailman/listinfo/pro2006
>
> ---------------------------------------------------------------------------
> Glenn Little [email protected] QCWA LM 28417
> Amateur Callsign: WB4UIV [email protected] AMSAT LM 2178
> QTH: Goose Creek, SC USA (EM92xx) ARRL TAPR
> ---------------------------------------------------------------------------
>
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
_______________________________________________
Pro2006 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pro2006
[Some portions of this message may have been removed]
--------------------- Original Message Ends ------------------------