[Pro2006] Trunker ?

Thu, 16 May 2002 18:15:54 -0700

If you have toggled CTS/DSR and INVERT and NORMAL every possible
combination, then I'm puzzled.. Do you see the spinner in the top of the
screen when you're on a data channel?  That's an indication that the
slicer is seen by the program.

Sean 

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mike
Sent: Thursday, May 16, 2002 9:06 AM
To: [email protected]
Cc: [email protected]; [email protected]; Perry; Edward
Lentz
Subject: Re: [Pro2006] Trunker ?

Interesting! Someone said I might have to run Trunker from DOS, not from
Windows. I tried that and it still did not work, BUT something
interesting when
I tried to run Slicer from DOS it said it could not connect to my com
port! When
I run Slicer as a DOS program from Windows it finds my com port (com1)
and
works fine. People have said that they are using the 2/4 level fsk
decoder and it
is working fine for them.

Trunker will start and run either from DOS or from Windows but just will
not display
any information. I have tried all the settings for the PIN selections
and nothing. This
interesting find with Slicer has me wondering if maybe for some reason
Trunker is
not connecting to my com 1 port? I tried it on com 3 also and same
results. I don't know
why it would not connect, it is a standard com port but something is
wrong.

Here is the way I have the start up file set up:

TRACKSLICERPORT=COM1
TRACKSLICERPIN=DSR
TRACKSLICERMODE=NORMAL
TRACKSCANPORT=COM3
TRACKSCAN=OPTO
TRACKSCANPARK=854.0000
NEWRADIO=10
NEWGROUP=8
FILTERLOG=1

Mike

Visit The My World of Radio Website at:
http://miked2000.home.mindspring.com/radioindex.htm

_______________________________________________
Pro2006 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pro2006