[Pro2006] Parallel port PC Interface and ProgramIT software

Wed, 3 Jul 2002 07:54:37 -0600

FWIW:

CHEEK The Ultimate Scanner Cheek 3!  
1995 Paperback -, -, Like new condition Book # 203670
Price: US$ 10.00 
 
ELEPHANTBOOKS.COM, 5755 Rossi Lane, Suite J, Gilroy, CA, U.S.A., 95020.
Phone: 877-905-0004. Fax: 408-848-2811. Email: [email protected]

On 2 Jul 2002 at 23:10, Len G. Carpenter wrote:

> Well if you can get ahold of the book   The Ultimate Scanner 3 by Bill Cheek,
> all the info to build a CE/HB-232.
> 
> Ed Tissink wrote:
> 
> > Hi Len
> >
> > I've had a bit of a look around for the CE/HB-232 and also the Opto456 lite.
> > They certainly look great but they're a bit beyond my budget unfortunately.
> > Once I pay freight to New Zealand I probably wouldn't get much change from
> > US$200, which I really don't have to spare at the moment.  Unless they come
> > down in price and/or I find a local distributor I'll have to stick with the
> > poor man's option for now.
> >
> > Cheers
> > Ed
> >
> > -----Original Message-----
> > From: Len G. Carpenter [mailto:[email protected]]
> > Sent: Wednesday, 3 July 2002 14:10 PM
> > To: [email protected]
> > Subject: Re: [Pro2006] Parallel port PC Interface and ProgramIT software
> >
> > Np Ed,
> >
> > I figured it had to be one of two things because it did work, just not
> > correctly.
> > A buddy had built a few of them an dI was going to till I decided to go with
> > the CE/HB-232.
> > To bad you couldn't get your hands on a CE/HB-232, if you think the
> > PROgrammit
> > is slick you should see the CE/HB-232 work with the Pro-Turbo software, full
> > control of the scanner, whatever you can do from the keypad you can do
> > through
> > software, plus many other things.
> >
> > Cheers
> >
> > Len
> >
> > Ed Tissink wrote:
> >
> > > Thanks for your prompt reply Len
> > >
> > > I have to confess my initial reaction to your post was along the lines of
> > > 'what do you take me for, of course my wiring is correct'  However, saying
> > > you had seen it running made me decide to have (yet) another look and I
> > did
> > > indeed have my X and Y's crossed.  Works a treat now.  I'd recommend it,
> > > cheap and easy to build (if you wire it correctly).
> > >
> > > Thanks
> > > Ed
> > >
> > > -----Original Message-----
> > > From: Len G. Carpenter [mailto:[email protected]]
> > > Sent: Tuesday, 2 July 2002 11:06 AM
> > > To: [email protected]
> > > Subject: Re: [Pro2006] Parallel port PC Interface and ProgramIT software
> > >
> > > I have not built it but have seen it running, I went with a CE/HB-232,
> > that
> > > one
> > > does program the scanner but you have to make sure you have set it up
> > > correctly,, also check you wiring, make sure they all go to the right
> > place,
> > > if
> > > you are getting wrong key press you maybe have some lines mixed up, if all
> > > is
> > > correct then you have the button map wrong.
> > >
> > > The information contained in this email is privileged and confidential and
> > > intended for the addressee only. If you are not the intended recipient,
> > you
> > > are asked to respect that confidentiality and not disclose, copy or make
> > use
> > > of its contents. If received in error you are asked to destroy this email
> > > and contact the sender immediately. Your assistance is appreciated.
> > >
> > > --- StripMime Report -- processed MIME parts ---
> > > multipart/alternative
> > >   text/plain (text body -- kept)
> > >   text/html
> > > The reason this message is shown is because the post was in HTML
> > > or had an attachment. Attachments are not allowed.
> > > Please post in Plain-Text only.---
> > > _______________________________________________
> > > Pro2006 mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/pro2006
> >
> > _______________________________________________
> > Pro2006 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/pro2006
> >
> > The information contained in this email is privileged and confidential and
> > intended for the addressee only. If you are not the intended recipient, you
> > are asked to respect that confidentiality and not disclose, copy or make use
> > of its contents. If received in error you are asked to destroy this email
> > and contact the sender immediately. Your assistance is appreciated.
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > The reason this message is shown is because the post was in HTML
> > or had an attachment. Attachments are not allowed.
> > Please post in Plain-Text only.---
> > _______________________________________________
> > Pro2006 mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/pro2006
> 
> _______________________________________________
> Pro2006 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pro2006
> 


 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Jim Handcock

 #include <std-disclaimer.h+smile> 
"Ensign Bridegroom?    He's WED, Jim!"
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -