[Premium-Rx] Collins HF-2050

[hf_mobile @hotmail.com]

In such cases I use silicone oil, as it does not have the tendency to resinify, as normal light machine oil does when it oxidates during time...

Finally I recommend not to use oil from a spray can as its pressure may transport oil into the encoder. If you use a tiny screwdriver to transport a drop of oil to the point where the axis goes into the encoder, this is much more target-oriented and less risky.

73 Andy


Von: premium-rx-bounces at mailman.qth.net <premium-rx-bounces at mailman.qth.net> im Auftrag von Don Moman VE6JY via Premium-Rx <premium-rx at mailman.qth.net>
Gesendet: Mittwoch, 23. Juni 2021 20:18
An: Daniel Robinson <dxace1 at gmail.com>
Cc: premium-rx at mailman.qth.net <premium-rx at mailman.qth.net>
Betreff: Re: [Premium-Rx] Collins HF-2050

Just needs a touch of a light lubricating oil, don't recall what I used.

On Wed, Jun 23, 2021 at 9:03 PM Daniel Robinson via Premium-Rx <
premium-rx at mailman.qth.net> wrote:

> Seeking advice from members who own and operate HF-2050.   Need
> information on main encoder shaft which on a receiver I have here is
> a bit too tight.   Thanks.
> ______________________________________________________________
> Premium-Rx mailing list
> Home: http://mailman.qth.net/mailman/listinfo/premium-rx
> Help Page: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Premium-Rx at mailman.qth.net
> Help Contact eMail:  radio at 8zo.com
> Home Page:  http://www.premium-rx.org/
>
______________________________________________________________
Premium-Rx mailing list
Home: http://mailman.qth.net/mailman/listinfo/premium-rx
Help Page: http://mailman.qth.net/mmfaq.htm
Post: mailto:Premium-Rx at mailman.qth.net
Help Contact eMail:  radio at 8zo.com
Home Page:  http://www.premium-rx.org/