[Premium-Rx] Miniceptor Manual

[David Schofield]

Hi All,

Does anyone out there have any schematics for the WJ-8607-93 Miniceptor?

I've got a copy of the installation / operation manual but it doesn't 
contain any schematics.

I've also got the manual for the WJ-8607A but their are no schematics in 
that one either.

I do have a working unit so may be able to repair the faulty one without 
any drawings, but it's always worth asking....

My "new" unit came with the fault report "lights came on for about 30 
seconds, then smoke came out, now dead", which I was kind of hoping 
would be a fairly obvious tantalum cap failure.

I've had a brief look around the PSU and can't see any obvious sign of 
"smoke", but someone has obviously been at it before me, as some of the 
tants have been replaced with electrolytic caps with short cropped legs 
Etc. and the 3 amp "Littlefuse" protecting the input is open circuit.

These are very modular receivers, so although compact, it shouldn't be 
an impossible task to locate the issue, but I don't really want to risk 
blowing up my good PSU module whilst doing so.

So if anyone out their, has at least a partial schematic of the PSU area 
that would be great. Obviously the complete schematic would be better 
still ;-)

I'm happy to pay a reasonable amount, or trade for another manual if it 
helps.

Cheers,
Dave.S.