[Premium-Rx] Cubic Module

[VK3XYZ]

Hi Joseph et al,
In the past I've made a replacement 2140-1116 panel interface. You'll find
some pics of it at http://members.iimetro.com.au/~gcd/data.html

If that looks to be of use to you till you find an original then you're
welcome to a blank PCB for $12 (that's what the production cost was per
board) + cost of postage, I still have a few boards about.

You'll need to supply your own ICs and D type connectors - shouldn't be too
difficult I sourced the hard items on ebay and the remainder from local
electronics shops.

I've just updated the file on the website to include the schematic ( I
recall there was at least one error on the schematic in the 3030 manual) and
pcb overlay. Although I mounted the 7805 to the PCB, if you have a housing
then you can mount it where it's supposed to mount and wire up a 3 pin
connector as used on the original.

The board works fine - worked first time, no white wire mods required. The
only issue with the PCB, as you'll see from the pics, is that when I sent
the file to the chinese PCB house they didn't tell me the PCB overlay gerber
file was incorrect, so some of the component labels are shifted to the right
of where they should be.

I use mine without a card housing, as long as there's no vibration etc then
it should be fine like that. It at least gets that 2nd receiver working.

Cheers
Greg
VK3XYZ


-----Original Message-----
From: Premium-Rx [mailto:premium-rx-bounces at mailman.qth.net] On Behalf Of
premium-rx-request at mailman.qth.net
Sent: Monday, 3 November 2014 11:00 AM
To: premium-rx at mailman.qth.net
Subject: Premium-Rx Digest, Vol 96, Issue 1

Send Premium-Rx mailing list submissions to
	premium-rx at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://mailman.qth.net/mailman/listinfo/premium-rx
or, via email, send a message with subject or body 'help' to
	premium-rx-request at mailman.qth.net

You can reach the person managing the list at
	premium-rx-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Premium-Rx digest..."


Today's Topics:

   1. Re: Collins HF-2050 - stiff tuning (michaelob666 at ntlworld.com)
   2. Fw:  Grease for dynamotors (michaelob666 at ntlworld.com)
   3. AEG TELEFUNKEN NS 1800 ENGLISH POWER SUPPLY INFO	REQUESTED
      (Pat1McA--- via Premium-Rx)
   4. WJ-8716 A3 First Converter (Steve Pappin via Premium-Rx)
   5. NS1600 POWER SUPPLY WANTED (Pat1McA--- via Premium-Rx)
   6. Wanted: Cubic module (Joseph Pinner)
   7. Cubic HF1030 BFO module wanted (Ron Ott)


----------------------------------------------------------------------

Message: 6
Date: Sun, 02 Nov 2014 12:53:47 -0500
From: Joseph Pinner <jpinner33 at att.net>
To: "milsurplus at mailman.qth.net" <milsurplus at mailman.qth.net>,
	armyradios at yahoogroups.com, premium-rx at mailman.qth.net,
	"Oddball_HF_SSB_Radio at yahoogroups.com"
	<Oddball_HF_SSB_Radio at yahoogroups.com>
Subject: [Premium-Rx] Wanted: Cubic module
Message-ID: <54566FAB.9010106 at att.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I am looking for the following module for my Cubic R3030 receiver:
Panel Interface module    2140-1116
     or
Panel Interface module    2861-1102
Joseph Pinner +
818 Hill St
Kingston, TN  37763
KC5IJD / NNN0PHR

-- 
Joseph Pinner
Kingston, TN

KC5IJD / NNN0PHR
Roane County OES 408



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com