[Premium-Rx] General Question about Debeg 7201

[Heinz Breuer]

Hello Andrew,
I just checked my manual. To block the receiver short pin 1 to GND (pin 3) of the DIN socket on the rear.
vy 73 Heinz DH2FA, KM5VT

Von meinem iPhone gesendet

Am 24.03.2014 um 15:44 schrieb Heinz Breuer <hbreuer at debitel.net>:

> The Debeg 7201 is a relabeled Siemens E410. I have the E410  manual and will check later today.
> vy 73 Heinz DH2FA, KM5VT
> 
> Von meinem iPhone gesendet
> 
> Am 24.03.2014 um 14:32 schrieb Andrew Kopke <andrewkopke at rocketmail.com>:
> 
>> 
>> 
>> 
>> 
>> ________________________________
>> 
>> 
>> 
>> 
>> I want to mute the receiver for use with a transmitter .
>> I unfortunately don't have a manual.
>> I'm sure that jack on the rear panel labeled "Blocking" Is the one. I tried shorting the two pins and it seeded to work. 
>> Am I right? 
>> 
>> Best regards , Andrew
>> ______________________________________________________________
>> Premium-Rx mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/premium-rx
>> Help Page: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Premium-Rx at mailman.qth.net
>> Help Contact eMail:  paul at 8zo.com
>> Home Page:  http://www.premium-rx.org/
> ______________________________________________________________
> Premium-Rx mailing list
> Home: http://mailman.qth.net/mailman/listinfo/premium-rx
> Help Page: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Premium-Rx at mailman.qth.net
> Help Contact eMail:  paul at 8zo.com
> Home Page:  http://www.premium-rx.org/
>