[Premium-Rx] Cubic R3030

[FRANCIS CARCIA]

Hi Greg,
Thank you. I think you are the guy who built a panel interface module. I wonder if you ever found a frame for your module?
Yes my CPU is the 1163 and I have them in a R2307 and a R3080. Sorry I don't have a copy of the schematic. I do have the manual for the R3090 somewhere. I will check to see which CPU and panel interface was used. I'll scan them and send you a
copy if they are the newer part numbers. I'm just going to bed and headed back to work in the morning after 2 weeks of vacation
so need plenty of beauty sleep tonight. I found a X2210 and it fixed the problem. 
TNX again,
Frank WA1GFZ


________________________________
 From: "VK3XYZ at wia.org.au" <VK3XYZ at wia.org.au>
To: premium-rx at mailman.qth.net 
Sent: Wednesday, January 1, 2014 8:12 PM
Subject: Re: [Premium-Rx] Cubic R3030
 

Hi Frank et al,
I've placed a copy of the R-2307 (which I believe is similar to the R-3030
or R-303A or so I'm told) CPU firmware V4.29 and the associated PLD JEDEC
file onto my data webpage. 

http://members.iimetro.com.au/~gcd/data.html

This receiver has the gpib module, it's a 2140-1112A rather than the 3030s
2140-1112 and I didn't open that for the eprom that is possibly in there. 

Hopefully this is what you're after but not sure given the CPU module of my
2307 is a 2140-1163 as opposed to the 2140-1110 CPU module of the 3030 and
the 3030 manual that's around shows the 2140-1110 module to be very
different to the 2140-1163.

Cheers
Greg
VK3XYZ
(ps - if anyone has a maintenance manual for the 2307 I'd be interested,
particularly if it has schematics for these later modules)

-----Original Message-----
From: premium-rx-bounces at mailman.qth.net
[mailto:premium-rx-bounces at mailman.qth.net] On Behalf Of
premium-rx-request at mailman.qth.net
Sent: Thursday, 2 January 2014 10:27 AM
To: premium-rx at mailman.qth.net

Message: 1
Date: Wed, 1 Jan 2014 11:23:35 -0800 (PST)
From: FRANCIS CARCIA <carcia at sbcglobal.net>
Cc: PREMIUM-RX <premium-rx at mailman.qth.net>
Subject: [Premium-Rx] Cubic R3030
Message-ID:
    <1388604215.52657.YahooMailNeo at web184701.mail.ne1.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1

Hi All,
Happy New Year everyone.
I wonder if there is anyone out there in radio land who has a copy of the
R3030 CPU software?
I may have corrupted something and sure could use a clean copy. this is the
one with IEEE488 interface and .5, 1, 2, 4, 8 kHz filters. A fresh set of
EEproms would be nice if anyone out there still has a programmer.
I'd be glad to pay for your trouble,
Thanks,
Frank WA1GFZ ?



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

______________________________________________________________
Premium-Rx mailing list
Home: http://mailman.qth.net/mailman/listinfo/premium-rx
Help Page: http://mailman.qth.net/mmfaq.htm
Post: mailto:Premium-Rx at mailman.qth.net
Help Contact eMail:  paul at 8zo.com
Home Page:  http://www.premium-rx.org/