[Premium-Rx] WJ-8711A Front Panel Problem

[Administrator/jhafele]

Robert-

Take a jumper cable with strong alligator clips and connect one end to a
well grounded piece of hardware on the rear of the front panel. Connect the
other end to the main chassis. If the problem is cured, make a small ground
wire with soldered lugs (not crimped) and attach it to a well grounded point
on the rear of the front panel and the other end to hardware on the main
chassis. Make this cable as short as possible. A faulty or intermittent
ground connection between the front panel and main chassis appears to be
fairly common with these receivers for some reason. It worked for me a while
back and I knew of another similar situation some time ago, too. It will not
hurt to give it a try. An easy fix it if pans out.

Good luck.

John WA1NLJ  Fairfield, CT.