[Premium-Rx] WTB Cubic R-3030 modules

[VK3XYZ]

Hi Lee,
Although I don't have any spare modules, I do have some spare PCBs I had 
made for the panel interface.
I wasn't able to find any panel modules so I layed out a PCB and had the 
boards made, so I had to buy a panel full. That leaves me with 10 spare 
boards.

The board is equivalent to a 2140-1116. Created it from the R3030 manual and 
corrected the mistakes on the schematic as I went.  It is double sided 
plated through hole. Component layout is similar to the 2140-1116. The only 
thing missing are the holes around the edge to mount it to the module frame. 
There is space to drill those if you wanted them. I also didn't check the 
gerbers before I sent them off and the silk screen has a few errors, some 
text has moved to the right 1/4 inch.

The board worked 1st time in an R2307. My receiver only had one panel 
Interface. As I didn't have a module the card sits there held in place by 
the two D37 connectors.

I've posted a few pics to my webpage if you're interested. 
http://members.iimetro.com.au/~gcd and can be found on the data page.

I also have a few spare 8259A & X2210P ICs for the board.

Cheers
Greg


> Message: 2
> Date: Fri, 18 Jun 2010 00:34:55 +0930
> From: "L D Ritta" <ufp at optusnet.com.au>
> Subject: [Premium-Rx] WTB Cubic R-3030 modules
> To: <Premium-Rx at mailman.qth.net>
> Message-ID: <223D97DA46CE4845A48C21895A7E5A9A at ufp>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hello Everyone
>
> I am looking for some modules to complete my Cubic R-3030(V) receiver  BFO 
> Detector   Panel interface
> if you have any spare please name your price and as long as I don't have 
> sell my firstborn to pay for them.
> and
> of course please email.
>
> 73 Lee
>
> End of Premium-Rx Digest, Vol 43, Issue 9
> *****************************************