[Premium-Rx] WJ 8626A-4 Receivers Information Needed.

[Phoenix0754 at aol.com]

Hi, thanks for the response.  Here is what I have, two 8626A-4s that  are 
in a frame with individual P/S and 50MHz reference clocks.  As per your  
description these do not have Hand Off.
 
I also have two more receivers in a full 9040 frame with a single power  
supply and multiple output clock and these have the Hand Off/STO along with 
the  other buttons as you described.  
 
Finally, I have a 9040 rack with 4 8626A-1s installed, each .5 to 30Mhz  
range.  
 
As to the manual, I will try DRS to see if they will have a copy on  hand.  
 
The 8626A-4s all work, I would like to have the keystroke procedure to put  
the radios through their paces.  
 
One more question, since these are all 86xx series receivers, could these  
be interfaced with the 8610 controller that I have on hand the same way I do 
for  the 8615s I have?
 
Again, thanks for your input, George Michael 
 
 
In a message dated 6/19/2009 3:57:25 P.M. Eastern Daylight Time,  
greer86 at att.net writes:

Hi  George,
Not all 8626A-4 receivers can do handoff.  Check your  keypad for the 
following buttons.  LH keypad 2nd button on the left  column needs to be 
marked H/Off and STO right below it.  The 2nd  button on the right hand 
column should be marked Ctrl and Exec below  it.  The 2nd button on the 
center column should be marked Exam and  below it RCL. If they are not 
marked 
like that you don't have a handoff  receiver.

Documentation is somewhat had to get.  I can't  copy manuals due to the 
fact that DRS (WJ was bought by them) does enforce  their copyright and I 
do 
business with them.  You could call DRS  about getting a manual.  BTW, 
their 
manuals start at $125.00 and go  up from there.  They show up on eBay 
sometimes.

I can  copy a couple of pages from the manual (with out having copyright 
issues),  but it will probably be a week or 2 until I can get to  it.

Regards,
Geoff

----- Original Message ----- 
From:  <Phoenix0754 at aol.com>
To: <premium-rx at mailman.qth.net>
Sent:  Friday, June 19, 2009 11:58 AM
Subject: [Premium-Rx] WJ 8626A-4 Receivers  Information Needed.


> Hi, this is the first time that I have  e-mailed the  Premium group.  I am
> looking for  Operations/Service information for the WJ  8626A-4 
Receivers, 
>  the
> 9040 Frames, and the 8626A-1 Receivers.  I have  several  that are fully
> functional but wish to fully explore their  capabilities  and 
> configurations.
>
> One thing that  I am especially looking for is the key stroke  sequences 
on
> the  8626A-4 receivers, how to set them up and hand off to the   8626A-1
> receivers.
>
> Any help would be greatly  appreciated.
>
> Regards, George Michael
>
>
>  **************Dell Inspiron 15: Now starting at $349
>  
(http://pr.atwola.com/promoclk/100126575x1222435718x1201460505/aol?redir=http:%2F%2Fad.doubleclick.
>  net%2Fclk%3B215748553%3B38126199%3Bs)
>  ______________________________________________________________
>  Premium-Rx mailing list
> Home:  http://mailman.qth.net/mailman/listinfo/premium-rx
> Help Page:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:Premium-Rx at mailman.qth.net
> Help Contact eMail:   paul at 8zo.com
> Home Page:  http://www.premium-rx.org/  



**************Dell Inspiron 15: Now starting at $349 
(http://pr.atwola.com/promoclk/100126575x1222435718x1201460505/aol?redir=http:%2F%2Fad.doubleclick.
net%2Fclk%3B215748553%3B38126199%3Bs)