[Premium-Rx] Harris RF-230 transceiver info wanted.

[MARC CHRISTIAN]

Hi Premium RX Friends!

Just received an Eddystone 6200 HF Communications Receiver, nice condition,
seems to work ok but for the following problem:

When the Receiver is powered-up after every 2 minutes the receiver cycles
through a re-set/clear memory cycle. The receiver will then go back to the
last tuned frequency but when another 2 minutes has passed it will cycle
again.

If one goes through the "BITE Test" there is a fail on Test 00!

We have done the obvious and looked for internal batteries (memory backup)
but nothing.

Any help or guidence would be much appreciated!

Kind Regards
Nicki
----- Original Message ----- 
From: "Hans.Hamradio" <hans.hamradio at lycos.nl>
To: <premium-rx at mailman.qth.net>
Sent: Sunday, October 07, 2007 3:17 PM
Subject: [Premium-Rx] Harris RF-230 transceiver info wanted.


> Hi Premium RX friends.
>
> Just obtained a very nice Harris RF-230 transceiver without any damage and
> in excellent mechanical  condition and ex.LSB (missing 9 MHZ USBfilter).
> However!! There was a short in a tantalium C. (33mf/25Volt) in the board
> fitted in the slot direct behind the front. After replacing it was working
> for 30 minutes.(Rx current now 0.7A instead of 1.7A under working
> conditions). Before starting another repairjob I like to know if the group
> can help me with the schematics. A link or pdf prefered.
> Tnx in advance,enjoy the hobby and greetings from Amsterdam NL.
>
> H at ns PA1AMS
>
>
> _______________________________________________
> Premium-Rx Mailing List
> To Post: premium-rx at mailman.qth.net
> For Info: http://mailman.qth.net/mailman/listinfo/premium-rx
> Visit the Website: http://www.premium-rx.org
> Email Help: paul at premium-rx.org
>