[Premium-Rx] Questions about Watkins Johnson 8618B (S 1)

[stephous]

Hello Ben,

Yes, it is directly to the right of the line out BNC connector, slotted
head, with a lock nut that must be released. Maximum power at 600 Ohms is 10
mW according to the manual. Factory setting is 2.4 V p-p. The minimum level
is not specified.

Steve

PCS Associates
949 Glenneyre Street
Laguna Beach, CA. 92651-2706
Phone: (949) 376-7844
FAX: (949) 376-7866
http://www.pcsassociates.net/
----- Original Message ----- 
From: "Ben Mesander" <benmesander at yahoo.com>
To: "stephous" <stephous at att.net>; <premium-rx at ml.skirrow.org>
Sent: Saturday, October 21, 2006 5:17 PM
Subject: Re: [Premium-Rx] Questions about Watkins Johnson 8618B (S 1)


>
> Hi Steve,
>
> > 2) A sound card will have a typical impedance range
> > of 10K to 20K ohms
> > depending on manufacturer. You can match the lines
> > if you want. Why not
> > adjust the line output pot down to 1V p-p or are you
> > already at the lower
> > limit?
>
> Is the location of the pot fairly obvious? I just
> assumed the unit did studio line level only from the
> output level.
>
> Regards,
> Ben
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com