[Premium-Rx] Re: Fastener Data

[stephous]

Would anyone care to verify my WJ fastener data before I place a volume buy?

On the head of the stud is a number (8, 6, etc). The number is the S code for total length. Because the studs are held in by a retainer the thickness requires a slightly higher S code than for non retained studs. I did my best to read the numbers off the heads with a magnifying glass. The Fairchild catalog can be found here:
http://www.motorsportsgear.com/pdf%20files/Camloc_RAM-A.pdf

Many group members have come forward asking for replacement studs. I will do my best to obtain and offer them.


1) WJ - 8618, 8617 series (Fairchild page A-15)

Short Stud = 5S44-6-1AA, Cadmium plated steel, Recessed cross, dash number = 6
Long Stud = 5S44-11-1AA, Cadmium plated steel, Recessed cross, dash number = 11


2) WJ - 8716, 8718 series (Fairchild page A-14)

Long Stud = 5S1-9, Cadmium plated steel, Minimum Projection cross, dash number = 9


Retainers for all 5F series studs (Fairchild page A-15)

5S3-1


Thank you,
Steve Pappin


PCS Associates
949 Glenneyre Street
Laguna Beach, CA. 92651-2706
Phone: (949) 376-7844
FAX: (949) 376-7866
http://www.pcsassociates.net/
  ----- Original Message ----- 
  From: stephous 
  To: premium-rx at ml.skirrow.org 
  Sent: Thursday, August 10, 2006 8:45 PM
  Subject: Fastener Data


  Everything you ever wanted to know about WJ / DRS fasteners and a few others:
  http://www.motorsportsgear.com/pdf%20files/Camloc_RAM-A.pdf

  I'm going to take some measurements and place orders for Flush Cross and Minimum Protrusion Cross studs. The split ring retainers are all the same. See installation instructions on page A-58 for assembly.

  Best Regards,
  Steve Pappin

  PCS Associates
  949 Glenneyre Street
  Laguna Beach, CA. 92651-2706
  Phone: (949) 376-7844
  FAX: (949) 376-7866
  http://www.pcsassociates.net/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/premium-rx/attachments/20060821/bc28d6de/attachment.htm