[Premium-Rx] Radios and High RF powers

[John Perlick]

Good point, but the filters are a much better option....toss out all that
unneeded noise energy!
----- Original Message -----
From: "Richard Reich" <richard.reich at saatt.co.uk>
To: <4cx250b at muohio.edu>; <premium-rx at ml.skirrow.org>
Sent: Friday, May 30, 2003 7:48 AM
Subject: Re[2]: [Premium-Rx] Radios and High RF powers


Hi Jim,

Have you tried using a tube front end? Very, very, very, EMP proof? (I duck
at
this point) :-)

Richard
***************************************************************
Richard Reich
Principal Engineer Hardware
SAAT Technology Ltd
Web: http://www.saatt.co.uk

DDI: +44(0)1420 545388
Fax: +44(0)1420 87259

Privileged, confidential and/or copyright information may be contained
in this e-mail. This e-mail is for the use only of the intended addressee.
If you are not the intended addressee, or the person responsible for
delivering it to the intended addressee, you may not copy, forward,
disclose or otherwise use it or any part of it in any way whatsoever.
To do so is prohibited and may be unlawful.

If you receive this e-mail by mistake please advise the sender
immediately by using the reply facility in your e-mail software.

This message is subject to and does not create or vary any contractual
relationship between SAAT Technology Limited and you.

Registered Office: Test House, Mill Lane, Alton, Hampshire, GU34 2QG
Registered in London. No. 4106589


_______________________________________________

Premium-Rx Mailing List
To Post: premium-rx at ml.skirrow.org
For Info: http://ml.islandnet.com/mailman/listinfo/premium-rx