[PPRAANet] Fwd: [DLARCforum] Free Yaesu programming software

[Steve KT0DX]

Wish it would cover the FT 5000.

Steve (KT0DX)

On 9/19/2020 14:08, Glenn wrote:
> Might wanna gives it a try!
>
> Glenn  n3ulw
>
>
>
> -------- Forwarded Message --------
> Subject:     [DLARCforum] Free Yaesu programming software
> Date:     Fri, 18 Sep 2020 14:14:17 -0400 (EDT)
> From:     bgkx33 via DLARCforum <dlarcforum at mailman.qth.net>
> Reply-To:     bgkx33 <bgkx33 at ptd.net>
> To:     DLARCforum at mailman.qth.net
>
>
>
> If you own a Yaesu FTDX1200, FTDX3000, FT991 or an FT991A, you can 
> download RTrestore for FREE! This is programming software for your radio.
> You can program and backup your radio's memories as well as it functions.
> http://www.vk2byi.com.au/ftrestore/
>
> Find it a pain in the rear to program a 6 meter repeater frequency 
> along with its PL? This will make it easy for you.
> Once your radio is programmed, you can save your configuration to a 
> computer file. Now if you screw up your radio, just upload the file to 
> the radio
> and you're ready to go.
> There is other programming software out on the market, but since this 
> is for free, why not try it?
>
> Barry, KU3X
> ______________________________________________________________
>
> ______________________________________________________________
> PPRAANet mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ppraanet
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:PPRAANet at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
This email has been checked for viruses by AVG.
https://www.avg.com