[PPRAANet] Wanted items - Chirp UV-5R file, T-Post driver, Auger for hole in ground

[Jon Richardson]

Attached is my local CSV file from a little over a year ago. It needs updating in locations 5 & 13, maybe others. I know Fred Kendall was sharing a file a while back, which might have a more appropriate (i.e. standardized) list.  My list was derived from the repeater book lookup for El Paso County a couple years ago and then I merged in a number of simplex frequencies.

What I do is archive the CSV files, which are editable in excel.  When I program the radio, I first pull the file off the radio into chirp, then import the csv off of my hard drive, which merges the info, then I push the result to the radio.

Dennis, I'm not sure if the email reflector will allow the attachment, but I'm also addressing this directly to you so you should get it.

Jon
KM4PEH

-----Original Message-----
From: ppraanet-bounces at mailman.qth.net <ppraanet-bounces at mailman.qth.net> On Behalf Of Dennis N0ABC
Sent: Saturday, October 3, 2020 5:46 PM
To: PPRAANet <ppraanet at mailman.qth.net>
Subject: [PPRAANet] Wanted items - Chirp UV-5R file, T-Post driver, Auger for hole in ground

Hi all,

Would anyone have any of the following available?

1) A general purpose Chirp file for Baofeng UV-5R  frequencies for the local area? (I hate to start from scratch!)

2) A T-Post driver (for putting fence "T-Post" into the ground) that I could borrow to put one post into my back yard for a ground-mount vertical antenna?

or

3) Access to a gas engine driven auger to put a 6-8" x 30-36" hole in the ground for same reason as #2 above?

Any help is greatly appreciated!!

73

Dennis
N0ABC


______________________________________________________________
PPRAANet mailing list
Home: http://mailman.qth.net/mailman/listinfo/ppraanet
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:PPRAANet at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html