[PPRAANet] Elecraft K2/100 Transceiver

[Thomas Brereton]

For Sale:

1. Elecraft K2/100
    Includes the following:
    K2/100 Transceiver -- 100 watts out on all ham bands 80-10 Meters
(Transverters are available for other bands)
    Tilt Stand
    Internal Audio Filter & Real Time Clock
    Noise Blanker
    DSP with fully selectable filters
    All modes (except FM)
    This is an extremely stable, high  performance rig in both receive and
transmit modes.

2. Elecraft KAT 100 Automatic Antenna Tuner
    This tuner, while working with other rigs, was designed to work with
the K2 line of transceivers.
    It is extremely efficient, tunes all frequencies with ease, has two
antenna outputs and digital 
    SWR display.

3. ICOM SM-6 Microphone which works very well with the K2.

Asking Prices:
	K2/100 Transceiver				$1200.00
	KAT Automatic Tuner				    200.00
	ICOM SM-6 Microphone                                      50.00

Will sell separately, but prefer to sell as a package (If sold as a package
will   reduce price by $50.00).

Can contact me via e-mail at padretom at earthlink.net or
                                             frtom3 at juno.com or
                                             Phone 719-390-9247

          K2 STANDARD FEATURES   Specifications and Pricing subject to
change without notice. 
Rugged, attractive custom enclosure 
Small, portable size: 2.9h x 7.8w x 8.2d inches  
Weight 3.3 lbs. (excluding internal options)  
80-10 meter ham band+ coverage; 160 m optional  
Efficient 12 Volt (10 - 15 V) operation for home or field  
Receive current as low as 150 mA (battery save mode)  
CW-only or SSB/CW + Digital Modes with SSB option  
Back-lit LCD and LED bargraph; day/night settings  
PLL synthesized--low phase noise 
Microprocessor controlled  
3 transverter bands; programmable display, I.F., power  Dual VFOs with
split operation.  
Direct keypad entry of frequencies and memory channels.  
RIT and XIT with four offset ranges  
Built-in high-efficiency speaker  
Memories store mode, VFO A/B, split, RX filter, etc.  
Simple menu system for advanced settings. (Up to two menu functions can be
assigned to the two programmable front panel function keys.)  
Room for additional connectors on the rear panel  
Smart ‘hunt and pounce’ band-scanning mode  
          RECEIVER 

Low-noise, single-conversion superhet receiver  
Double-balanced diode mixer for excellent dynamic range 
Receive sensitivity: 0.15 uV (pre-amp on, typical.) 
Narrow ham-band, double-tuned bandpass 
RX/TX filters, relay switched for better IMD response 
Smooth, fast attack, I.F.-derived AGC (no "popping")  Switchable preamp and
attenuator 
Variable-bandwidth I.F. crystal filtering  
Multiple VFO tuning rate selections  
10 Hz tuning resolution  
Bar graph S/RF OUT/ALC meter  
Adjustable squelch  
          TRANSMITTER 
Adjustable 0.1-15 W (K2), 0.1 – 100W (K2/100) 
Rugged, SWR-protected, push-pull PA transistors  Programmable current limit
for battery operation  
Harmonics and spurious outputs: Better than –40 dBc  

          CW FEATURES 
Full diode switched break-in with variable QSK delay (Both at QRP and 100W
levels) 
9-memory keyer; iambic A and B; adjustable weight  
9-50 wpm (internal keyer); 70+ wpm (external keying)  
Programmable message repeat interval  Simultaneous computer and paddle CW
keying inputs 
Variable bandwidth crystal filter (approx. 200 - 2000 Hz) 
Adjustable RX CW offset with tracking TX side tone. 
Selectable opposite sideband RX for QRM reduction 

Thomas Brereton
padretom at earthlink.net
Why Wait? Move to EarthLink.



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.11/45 - Release Date: 7/9/2005