[PPRAANet] Fw: PPARES: RE: RFI and Davis Wx stations

Wed, 30 Apr 2003 08:58:16 -0600

----- Original Message -----
From: "Tom Raymond" <[email protected]>
To: "Benedict B. Cruise" <[email protected]>
Sent: Tuesday, April 29, 2003 3:05 PM
Subject: RE: PPARES: RE: RFI and Davis Wx stations

Hello,

I'm afraid that if you already are using the Protected Junction Box,
shielded
cable and torroid cores and you are still having problems then we are in
trouble. I'm not sure what else can be done other then moving the display
around to different locations. You can extend the cable between the display
and PC or radios another 40 feet if that helps.

Tom Raymond
Davis Instruments
Technical Support
[email protected]

-----Original Message-----
From: Benedict B. Cruise [mailto:[email protected]]
Sent: Tuesday, April 29, 2003 11:52 AM
To: Tom Raymond
Cc: PPRAA reflector; ARES reflector
Subject: Re: PPARES: RE: RFI and Davis Wx stations

Thanks for the response, Tom.  I have forwarded it to the two reflectors in
the area where this is being discussed.  It reaches about 200 hams in the
area.  Moving the station display is not a very good fix.  Most of us use
the
Wx station in connection with our radio stations and want the station
display
in the radio shack and available from the operating position.  I have
shielded cable, protected junction box and toroid coil on cable.  Now you
tell me the display is the culprit.  OK what is a doable fix?

    Thanks,  Ben Cruise,  N0LNW