[PCR-1000] RE:PCR1000 *Bug*

[Mike Curtis]

Most of us gave up on the Icom program a long time ago.
Since TalkPCR is now free I see no reason not to use it.
I would be curious to see if it had the same problem.


----- Original Message ----- 
From: "al" <ald at nexet.net>
To: <pcr-1000 at mailman.qth.net>
Sent: Wednesday, May 19, 2004 3:01 PM
Subject: [PCR-1000] RE:PCR1000 *Bug*


>   I use the supplied software (latest version).I've always associated
"bug"
> as being software related.
>
>   You can not do anything when working from a tone squelch freq.If you are
> monitoring a tone squelch freq & see some activity on your scope & click
to
> that freq the tone squelch stays active.
>
>   Nothing earth-shattering here.Just something to keep in mind.
>
>   Al
>
>   Btw....I get the pcr1000 list in digest mode so it may take a'while for
> me to see/answer a question directed too me via a post only too the list.
>
>
>
> >Ah, but Al -- is this a bug in the PCR-1000 or is it a bug in whatever
> >program you are using to control the beast?  What control program are you
> >using?  I haven't noted anything like that in TalkPCR but maybe only
because
> >those specific circumstances haven't come into play here.  What say???
Vic
> >
> >
> >
> >-----Original Message-----
> >From: pcr-1000-bounces at mailman.qth.net
> >[mailto:pcr-1000-bounces at mailman.qth.net]On Behalf Of al
> >Sent: Wednesday, May 19, 2004 11:07 AM
> >To: pcr-1000 at mailman.qth.net
> >Subject: [PCR-1000] PCR1000 *Bug*
> >
> >
> >This bug involves the use of tone squelch on a freq.
> >
> >   For example,say you have it activated on 155.535.You are scanning a
bank
> >&,for whatever reason,155.535 becomes active & you stop the scan to
> >continue to listen to the comms on that freq.Keeping in mind that that
freq
> >has tone squelch activated.
> >
> >   Ok now it's a few minutes later & you decide to do a progressive scan
> >between two freqs.
> >   I've found,on my pcr1000 anyway,that if you begin the progressive scan
> >after having a tone squelch freq active the tone squelch continues to
stay
> >active preventing any comms getting through unless one of the freqs in
the
> >progressive scan happens too employ that same tone used on your 155.535
> >freq.
> >
> >   One has to remember to change to a non tone squelch freq before doing
> >anything else.
> >
> >   Al
> >--
> >al dudley ....wash dc metro , usa
> >      ald at nexet.net
> >             *************
> >     pro 2006,2052,pcr1000,r100
>
> ______________________________________________________________
> PCR-1000 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:PCR-1000 at mailman.qth.net
>