[PCR-1000] Talk PCR scan

Wed May 5 23:51:43 EDT 2004

TalkPCR, at least in the 2.99d mode, DOES Spectrum Analyze with CW and SSB.
I suggest you try to re-enter the scan frequencies again, and set up
for SINGLE sweep, then use the INIT button.
 I don't understand the former explaination. If you sweep the local oscillator,
the BFO never plays into the picture...
--
Skip Flem, NT1G
 Hull, Massachusetts
> On Wed, May 05, 2004 at 10:33:58PM +0100, George Shaw wrote:
> > Would anyone like to explain how to get spectrum analyser scan working in
> > Talk PCR I have tried and it just sits there doing nothing.
> 
> It won't work in CW or SSB modes; the BFO in those modes is needed to
> do the scanning for the spectrum analyzer, and the hardware apparently
> is designed so that the spectrum analyzer doesn't have first claim on
> the BFO. 
> 
> -- 
> Mike Andrews
> [email protected]
> Tired old sysadmin 
> ______________________________________________________________
> PCR-1000 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:[email protected]