[PCR-1000] Re: PCR-1000 digest, Vol 1 #334 - 2 msgs

Thu, 1 May 2003 22:30:30 -0400

I would not call this spam.  It was an informative post that was complety on
topic.
I am the biggest spam hater in the word, but this didn't bother me...

----- Original Message ----- 
From: "Keith Gr�nberger" <[email protected]>
To: <[email protected]>
Sent: Thursday, May 01, 2003 6:43 PM
Subject: [PCR-1000] Re: PCR-1000 digest, Vol 1 #334 - 2 msgs

> Hi @ all!
>
>
> Is this the beginning of spam in this group??
>
> CU
> Scotty!
> ----- Original Message -----
> From: <[email protected]>
> To: <[email protected]>
> Sent: Friday, May 02, 2003 12:34 AM
> Subject: PCR-1000 digest, Vol 1 #334 - 2 msgs
>
>
> > Send PCR-1000 mailing list submissions to
> > [email protected]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://mailman.qth.net/mailman/listinfo/pcr-1000
> > or, via email, send a message with subject or body 'help' to
> > [email protected]
> >
> > You can reach the person managing the list at
> > [email protected]
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of PCR-1000 digest..."
> >
> >
> > Today's Topics:
> >
> >    1. Re: RDS with PCR1000? (ed)
> >    2. PROBE1K - new software for PCR-1000 (ed)
> >
> > --__--__--
> >
> > Message: 1
> > Date: Thu, 01 May 2003 10:09:14 -0400
> > To: [email protected]
> > From: ed <[email protected]>
> > Subject: Re: [PCR-1000] RDS with PCR1000?
> > Reply-To: [email protected]
> >
> > this should interest many on the list.  it's especially interesting that
> so
> > much increased PCR-1000 capability can be achieved on an old DOS
computer
> > that many people would consider useless junk.
> >
> > i personally use PROBE7 from this author with my Optocom, and it's an
> > exceptionally well thought-out and powerful piece of software.
> >
> > -ed
> >
> > http://www.probe1k.com/
> >
> > PROBE1K - Software developed exclusively for scanning 25 to 1300 MHz
with
> > the Icom IC-PCR1000 Computer Controlled Receiver / Scanner.
> >
> > Faster scanning speed and CTCSS tone squelch.
> >
> > Loaded with unique scanning features like SmartScan, TacScan and
> > Hyperbanks.
> >
> > Hear more of what you want to hear as it happens with your Icom PCR1000.
> >
> > Utilizes a true database engine for fast, easy and efficient data
> > management.
> >
> > Large data capacity - 4000 groups, each with 99 banks, 1000 frequencies
> > per bank.
> >
> > PROBE1K runs well on low cost computer hardware.
> >
> > Dependable and stable long term non-stop operations with the PCR1000.
> >
> > PROBE1K leads the way in "virtual computer controlled scanning" by
> > providing new, innovative and versatile features. Compare PROBE1K's
> > features with any other software and you'll see why PROBE1K is the best
> > scanning software for the Icom IC-PCR1000.
> >
> >
> > Overview
> >
> > FASTEST Scanning Software Available for Icom IC-PCR1000 - PROBE1K is
> > specifically coded for "scanning" 25 - 1300 MHz in order to achieve high
> > speed frequency acquisition and CTCSS tone detection with the Icom
> > PCR1000. Unlike other PCR1000 compatible programs, PROBE1K can detect
tone
> > squelch without seriously impacting scanning speed - even when multiple
> > CTCSS tones need to be checked for the same frequency! The frequency is
> > tuned just once when multiple tones need to be checked for the same
> > frequency. Scanning speeds in excess of 40 frequencies per second have
> > been achieved with PROBE1K. Scanning speed results are displayed
directly
> > on the scanning screen. "Filter" and "ATT" settings are provided for
each
> > frequency record for better reception and control.
> >
> > Powerful, Intuitive and Easy to Use - Mnemonics are used throughout the
> > program making functions easier to remember while providing immediate
> > control over the PCR1000. Single specific keystrokes provide a true
> > "control panel" feel. No need to look at a monitor screen to control the
> > receiver.
> >
> > Versatile - Works on virtually all IBM compatible computers, both DOS
and
> > most Windows based operating systems. You can use older and inexpensive
> > PCs for dedicated "terminal based" computer controlled scanning. No need
> > for extra memory, special graphics, annoying device drivers, or
> > complicated operating system setups. PROBE1K provides a very stable
> > operating environment for long term non-stop operations. Check out some
of
> > the laptops and monitors we enjoy using with PROBE1K.
> >
> > Data Driven - PROBE1K uses a high speed database engine (dBASE format)
for
> > "virtual computer controlled scanning". Provides large capacity data
> > management (4000 groups, each with 99 banks, 1000 frequencies per bank)
> > while attaining maximum scanning performance without demands for extra
> > memory or processing power.
> >
> > Specifically Designed for Scanning - Features like TacScantm,
SmartScantm,
> > Hyperbanks and Hypersettings provide functionality beyond the common
scope
> > of "manual tuning" programs primarily designed for Shortwave and HF
> > reception. These, and other functions, provide more continuity and
control
> > of what you hear. Hear more of what you want to hear as it happens!
> >
> > Summary - Look closely at the features and benefits of PROBE1K. Compare
> > them carefully with other PCR1000 compatible programs. Then consider
> > PROBE1K runs extremely well on low cost computers. If having fast and
easy
> > control of the PCR1000 is important, you won't find anything more
capable
> > than PROBE1K. When you're controlling your PCR1000 with PROBE1K, you'll
> > feel like you're getting instant results - the same as if you were
> > pressing the buttons directly on a scanner - no "delays" or feeling
> > "disconnected" from the radio. Best of all, you will get maximum
possible
> > scanning speed and performance - something the others just can't
promise.
> >
> >
> > Features
> >
> > Exceptional Bank and Frequency Management - Select up to 99 banks to
scan
> > at one time, containing up to 1000 frequencies each, quickly, easily,
and
> > without having to leave scanning screen. Banks include descriptive
fields
> > up to 25 characters for each bank, incremental search and tagging of
banks
> > for easy identification, lookup and selection.
> >
> > Group File Management - Provides up to 4000 groups of 99 banks, each
group
> > with separate and customizable configurations including frequency, bank,
> > logs, radio service codes, VFO keys, Hyperbanks, Hypersettings and alarm
> > files.
> >
> > SmartScantm - Allows you to instantly and automatically focus on
changing
> > events! Key frequencies are assigned as triggers. When activity is
> > detected on one of these key frequencies, PROBE1K activates an assigned
> > bank of frequencies, called a "SmartBank", for a specified amount of
dwell
> > time. A SmartBank can be any bank of a few frequencies or as many as
1000.
> > For each key frequency, you can choose whether the SmartBank is the only
> > bank scanned (exclusive mode), or is added to current banks scanned
> > (non-exclusive mode). The length of dwell time spent in either mode can
be
> > tailored to your own situation. If activity is detected within the
> > SmartBank of frequencies during the dwell time, the dwell timer is reset
> > so you can continue to monitor the action.
> >
> > For example, you can designate the air emergency frequency 121.5000 as a
> > key frequency. When it becomes active, you can have your scanner
> > exclusively scan just those frequencies related to the air emergency
> > frequency, like the local tower, ground control, rescue squad and air
port
> > security, or you can include them with the other frequencies being
scanned
> > in the non-exclusive mode. Once the actions settles down, normal
scanning
> > resumes. This is just one of many uses for SmartScan.
> >
> > TacScantm - The benefit of TacScan is quite noticeable, particularly
when
> > you are scanning a large number of frequencies. While you can use the
> > standard "delay" features on a normal scanner, they are usually too
short
> > to be effective. You could use PROBE1K's extended delay features, but
> > applying a lengthy delay can result in hearing less traffic. With
TacScan,
> > your odds of hearing a "response" to a dispatch are greatly improved.
When
> > you are searching a large number of frequencies, you will hear more
> > activity, less dead air and enjoy better continuity. Find, identify and
> > log those "new" frequencies quickly!
> >
> > TacScan assigns an active frequency to a priority position in the
scanning
> > list for a specified period of time. When and how the frequency is
> > assigned as a TacScan frequency is based on the settings for TacScan.
You
> > can set TacScan on "auto", or use PROBE1K's logging features, as a
trigger
> > so a frequency found active is assigned to the TacScan scanning list.
You
> > can also manually assign an active, or last active frequency to the
> > TacScan list right from the scanning screen. You will definately "hear
the
> > difference" with TacScan.
> >
> > Hyperbankstm - "Imagine having ten scanners sitting on your desk."
reports
> > John McColman from AOSC Journal. With just one simple keystroke, this
new
> > feature immediately activates any combination of 99 scanning banks. Each
> > of the ten available Hyperbanks can be customized with a description so
> > you can easily remember what each Hyperbank is designed to monitor.
> > Hyperbanks allows the PCR1000 to become a tactical system, where it is
> > quickly and easily reconfigured to the needs of the moment. Rather than
> > switching through various screens, or deactivating and activating banks,
> > you only have to press one function key and go. Thus, with the ten
> > function keys having separate bank selections, it is like having ten
> > scanners available, all at the touch of one key.
> >
> > Let's say you have any number of banks setup to suit your interests.
> > There's a bank for fire, another for media and another for local
> > government. You can configure the "F1" key to activate these three banks
> > and describe it as "Fire" . Other banks could include your favorite
> > frequency banks such as federal law enforcement, local and state law
> > enforcement. Configure the "F10" key with these banks and describe it as
> > "Favorite Frequencies". When a major event occurs, press "F1" and the
> > fire, media and local government banks are immediately activated. When
> > everything is finished, press "F10" and you are back to your normal
> > configuration.
> >
> > Hypersettingstm - In addition to PROBE1K's ability to "memorize" (save)
> > various bank selections to one "Hyperbank key", PROBE1K provides the
> > option of memorizing PROBE1K's "Settings" into the same key. A Hyperbank
> > key not only controls bank selections, but controls most of the scanning
> > operations, features and functions instantly.
> >
> > Hypergroupstm - Switch between any 10 "Groups" on the fly directly from
> > the scanning screen! Assign any of the "F1" through "F10" keys to your
10
> > favorite groups. Once scanning, pressing "Alt-H" provides a pick list of
> > groups. Or you can use the key combination of <Alt> and any of the
> > preassigned "F" keys to go directly to a group.
> >
> > VFO Keys - This feature provides immediate access for those most
important
> > frequencies from the scanning screen or the manual tuner. Up to 10
> > individual frequencies can be assigned to the "F1" through "F10" keys -
> > called "VFO Keys". In addition to a frequency, each VFO key can store
the
> > mode, tone, step rate and a description for each frequency. There's also
a
> > handy VFO key pick list. Once a VFO key is pressed, the associated
> > frequency is immediately tuned in the "Manual Tuner" where it can be
> > changed, or stepped up or down based on the step rate you programmed
into
> > the VFO key. Tone squelch control is also provided.
> >
> > Automark and Autolock - These features provide a method for easily
> > identifying which frequencies are in use in your area. An excellent tool
> > for professional users responsible for frequency coordination and
spectrum
> > analysis. "Automark" automatically highlights (marks) frequency records
on
> > file based on the number of "hits" recorded in the log file. Coupled
with
> > enhanced functions in the frequency viewer, you can copy or move either
> > the marked or unmarked frequency records from a specific bank, or from
the
> > entire frequency file, to a different bank or group. Like "Automark",
> > "Autolock" locks out active frequencies based on the number of "hits"
> > allowing the program to concentrate more time checking on the remaining
> > frequencies for activity.
> >
> > Extensive Frequency Management Tools Built In - Frequency file viewer
and
> > editor provides expanding, contracting and locking columns for easy
> > viewing. Column order of frequency data can be customized to suit your
> > needs. Provides multiple sorting options for different ordering of data.
> > Incremental searching for fast lookups. Create subsets and print
frequency
> > data. Speed entry and instant duplication check for new frequency data.
> > Direct access to frequency file and full screen frequency data editor
> > accessible right from the scanning screen!
> >
> > One of the many unique frequency management tools is the "Compare /
Copy"
> > function. This feature allows you to copy selected frequency data from
one
> > group into another. After the selected records are copied, they are
> > compared to the other records in the current group. Those which are
> > duplicated elsewhere in the group are "marked" (highlighted) and those
> > which are new are unmarked. You can easily delete the marked records if
> > you only want to view the new records, or delete the unmarked records to
> > see the duplicates. For those new records you wish to keep, you can
> > reassign them to their appropriate banks. This make sharing frequency
> > files with others a snap. You can "Copy / Compare" their frequency files
> > with yours making it easier to update and synchronize frequency files.
> > Another benefit is being able to combine one group with another while
> > eliminating unnecessary duplication.
> >
> > Imports PCR1000 "MCH" Files - PROBE1K allows you to import existing
> > frequency data from Icom's software as well as the free data available
for
> > the Icom PCR1000 from Icom's free online "Frequency Finder" website.
> > Import routine allows you to assign incoming data to specific banks
within
> > PROBE1K. Bank assignments can be left intact or frequency data can be
> > consolidated into one bank.
> >
> > Imports FCC Data - PROBE1K utilizes FCC data better than any other
> > software by importing more of it. Works with FCC Data from National
> > Communications' "Mr. Scanner" CD ROM or any other FCC data that conforms
> > to "UFDBF" standards. Built-in FCC radio service descriptions and codes
> > provided. Breaks down FCC data by putting each service type into an
> > individual bank. Automatically fills in bank descriptions with FCC radio
> > service descriptions (when available) for easy selection of which radio
> > services to scan. Uses latitude and longitude data (when available) for
> > calculating distance from monitoring location to transmitter. Built-in
> > radius search function allows you to import just those frequencies in
your
> > area. Frequencies which can't be tuned or are out of the tuning range of
> > the scanner are automatically eliminated. Duplicate frequencies are only
> > tuned once when scanning. Duplicate licensee records can be deleted by
> > using a special "Dupecheck" function while scanning.
> >
> > Imports CSV Data - CSV data, a common data format, can be imported
> > directly into PROBE1K. You control what data goes where. Also allows
> > importing frequencies from a regular text file where frequencies are
> > delimited by carriage returns and line feeds.
> >
> > Log all or specific frequencies / tones / DTMF data - Log is readily
> > viewed and printed during scan session. Logging includes time and date
> > stamp and options for logging individual or cumulative transmissions of
> > DTMF data. Accumulated air time and average signal strength included.
> > Immediate access tot he log directly from the scanning screen and
> > instantly tune a logged frequency. A "Minimum Airtime" setting
eliminates
> > logging frequencies due to short squelch openings and repeater delays
that
> > may otherwise hold the frequency open.
> >
> > More on-line data for active frequencies - Scanning screen includes
> > licensee name, address, city, state, county, radio service type and
> > description, callsign, transmitter latitude, longitude, group name, log
> > file name, bank number and bank description.
> >
> > More on-line status indicators - Status indicators and data include
> > scanning speed, current active frequency, CTCSS / DTMF codes, signal
> > strength, log, alarms, priority, delays, current time, SmartScan,
> > SmartBank, and an active log of the most recent frequency activity.
> >
> > Unique "Lite Bar" and "Manual" tuning Functions - "Direct access on-line
> > tuning" from both the frequency and log file viewers provide immediate
> > tuning of highlighted frequency or log record. Manual mode provides
> > variable tuning directly from scan screen; acts like a "tuning knob".
Tone
> > control, signal strength, and DTMF readout included. You can even toggle
> > the PCR1000's "ATT" switch for deattenuating the signal.
> >
> > These are just a few of the many features PROBE1K has to offer. Other
> > features include:
> >
> > Individual "Filter" and "ATT" settings can selected for each frequency
> > record
> >
> >
> > "Templock" for nuisance transmissions with variable time control
selected
> > on the fly while scanning
> >
> >
> > "Templock Monitor" temporarily locks out a frequency that may be the
> > result of "stuck key" or otherwise is interfering with the regular
> > scanning process
> >
> >
> > Variable monitoring time limit
> >
> >
> > Selectable priority bank including a variable sample rate for focusing
on
> > the most important frequencies
> >
> >
> > Dual delay "global" timers as well as a "Custom Delay" for an individual
> > frequency
> >
> >
> > Export frequency or log data to ASCII text file, CSV file, mapping file
> > (frequency data only) and "UFDBF" file
> >
> >
> > Visual Alarmstm allows you to assign a frequency with any one of nine
> > customized visual and audio alarms. When an "alarmed" frequency goes
> > active, the name appears in the activity window in its specially
assigned
> > color?
> >
> >
> > Delete duplicates function allows you to automatically create search
files
> > for a specified range of frequencies while leaving out any frequencies
> > which are already in a selected group's frequency file
> >
> >
> > Enhanced "Frequency Dupe Check" allows you to view a duplicate frequency
> > record when adding new ones
> >
> >
> > "Total Frequency Count" provides a total count of all frequencies being
> > scanned and frequencies per bank
> >
> >
> > Display colors can be changed and monochrome is also supported
> >
> >
> > Display up to 50 lines of data on screen at once for larger frequency,
log
> > and history lists
> >
> >
> > Four different types of scan indicators including a "scan speed"
indicator
> >
> >
> > Signal strength display provides actual readings from receiver giving
you
> > a wider range of numbers
> >
> >
> > Compare all these features with any other software and you'll see why
> > PROBE1K is the best scanning software for the Icom PCR1000.
> >
> >
> >
> > --__--__--
> >
> > Message: 2
> > Date: Thu, 01 May 2003 18:29:12 -0400
> > To: [email protected]
> > From: ed <[email protected]>
> > Subject: [PCR-1000] PROBE1K - new software for PCR-1000
> > Reply-To: [email protected]
> >
> > i just purchased this new PCR-1000 software, and am interested in
hearing
> > others' experiences with it.  has anyone else on the list tried it yet?
> >
> > -ed
> >
> >
> > >Date: Thu, 01 May 2003 10:09:14 -0400
> > >To: [email protected]
> > >From: ed <[email protected]>
> > >Subject: Re: [PCR-1000] RDS with PCR1000?
> > >
> > >this should interest many on the list.  it's especially interesting
that
> > >so much increased PCR-1000 capability can be achieved on an old DOS
> > >computer that many people would consider useless junk.
> > >
> > >i personally use PROBE7 from this author with my Optocom, and it's an
> > >exceptionally well thought-out and powerful piece of software.
> > >
> > >-ed
> > >
> > >http://www.probe1k.com/
> > >
> > >PROBE1K - Software developed exclusively for scanning 25 to 1300 MHz
with
> > >the Icom IC-PCR1000 Computer Controlled Receiver / Scanner.
> > >
> > >Faster scanning speed and CTCSS tone squelch.
> > >
> > >Loaded with unique scanning features like SmartScan, TacScan and
> > >Hyperbanks.
> > >
> > >Hear more of what you want to hear as it happens with your Icom
PCR1000.
> > >
> > >Utilizes a true database engine for fast, easy and efficient data
> > >management.
> > >
> > >Large data capacity - 4000 groups, each with 99 banks, 1000 frequencies
> > >per bank.
> > >
> > >PROBE1K runs well on low cost computer hardware.
> > >
> > >Dependable and stable long term non-stop operations with the PCR1000.
> > >
> > >PROBE1K leads the way in "virtual computer controlled scanning" by
> > >providing new, innovative and versatile features. Compare PROBE1K's
> > >features with any other software and you'll see why PROBE1K is the best
> > >scanning software for the Icom IC-PCR1000.
> > >
> > >
> > >Overview
> > >
> > >FASTEST Scanning Software Available for Icom IC-PCR1000 - PROBE1K is
> > >specifically coded for "scanning" 25 - 1300 MHz in order to achieve
high
> > >speed frequency acquisition and CTCSS tone detection with the Icom
> > >PCR1000. Unlike other PCR1000 compatible programs, PROBE1K can detect
> tone
> > >squelch without seriously impacting scanning speed - even when multiple
> > >CTCSS tones need to be checked for the same frequency! The frequency is
> > >tuned just once when multiple tones need to be checked for the same
> > >frequency. Scanning speeds in excess of 40 frequencies per second have
> > >been achieved with PROBE1K. Scanning speed results are displayed
directly
> > >on the scanning screen. "Filter" and "ATT" settings are provided for
each
> > >frequency record for better reception and control.
> > >
> > >Powerful, Intuitive and Easy to Use - Mnemonics are used throughout the
> > >program making functions easier to remember while providing immediate
> > >control over the PCR1000. Single specific keystrokes provide a true
> > >"control panel" feel. No need to look at a monitor screen to control
the
> > >receiver.
> > >
> > >Versatile - Works on virtually all IBM compatible computers, both DOS
and
> > >most Windows based operating systems. You can use older and inexpensive
> > >PCs for dedicated "terminal based" computer controlled scanning. No
need
> > >for extra memory, special graphics, annoying device drivers, or
> > >complicated operating system setups. PROBE1K provides a very stable
> > >operating environment for long term non-stop operations. Check out some
> of
> > >the laptops and monitors we enjoy using with PROBE1K.
> > >
> > >Data Driven - PROBE1K uses a high speed database engine (dBASE format)
> for
> > >"virtual computer controlled scanning". Provides large capacity data
> > >management (4000 groups, each with 99 banks, 1000 frequencies per bank)
> > >while attaining maximum scanning performance without demands for extra
> > >memory or processing power.
> > >
> > >Specifically Designed for Scanning - Features like TacScantm,
> SmartScantm,
> > >Hyperbanks and Hypersettings provide functionality beyond the common
> scope
> > >of "manual tuning" programs primarily designed for Shortwave and HF
> > >reception. These, and other functions, provide more continuity and
> control
> > >of what you hear. Hear more of what you want to hear as it happens!
> > >
> > >Summary - Look closely at the features and benefits of PROBE1K. Compare
> > >them carefully with other PCR1000 compatible programs. Then consider
> > >PROBE1K runs extremely well on low cost computers. If having fast and
> easy
> > >control of the PCR1000 is important, you won't find anything more
capable
> > >than PROBE1K. When you're controlling your PCR1000 with PROBE1K, you'll
> > >feel like you're getting instant results - the same as if you were
> > >pressing the buttons directly on a scanner - no "delays" or feeling
> > >"disconnected" from the radio. Best of all, you will get maximum
possible
> > >scanning speed and performance - something the others just can't
promise.
> > >
> > >
> > >Features
> > >
> > >Exceptional Bank and Frequency Management - Select up to 99 banks to
scan
> > >at one time, containing up to 1000 frequencies each, quickly, easily,
and
> > >without having to leave scanning screen. Banks include descriptive
fields
> > >up to 25 characters for each bank, incremental search and tagging of
> banks
> > >for easy identification, lookup and selection.
> > >
> > >Group File Management - Provides up to 4000 groups of 99 banks, each
> group
> > >with separate and customizable configurations including frequency,
bank,
> > >logs, radio service codes, VFO keys, Hyperbanks, Hypersettings and
alarm
> > >files.
> > >
> > >SmartScantm - Allows you to instantly and automatically focus on
changing
> > >events! Key frequencies are assigned as triggers. When activity is
> > >detected on one of these key frequencies, PROBE1K activates an assigned
> > >bank of frequencies, called a "SmartBank", for a specified amount of
> dwell
> > >time. A SmartBank can be any bank of a few frequencies or as many as
> 1000.
> > >For each key frequency, you can choose whether the SmartBank is the
only
> > >bank scanned (exclusive mode), or is added to current banks scanned
> > >(non-exclusive mode). The length of dwell time spent in either mode can
> be
> > >tailored to your own situation. If activity is detected within the
> > >SmartBank of frequencies during the dwell time, the dwell timer is
reset
> > >so you can continue to monitor the action.
> > >
> > >For example, you can designate the air emergency frequency 121.5000 as
a
> > >key frequency. When it becomes active, you can have your scanner
> > >exclusively scan just those frequencies related to the air emergency
> > >frequency, like the local tower, ground control, rescue squad and air
> port
> > >security, or you can include them with the other frequencies being
> scanned
> > >in the non-exclusive mode. Once the actions settles down, normal
scanning
> > >resumes. This is just one of many uses for SmartScan.
> > >
> > >TacScantm - The benefit of TacScan is quite noticeable, particularly
when
> > >you are scanning a large number of frequencies. While you can use the
> > >standard "delay" features on a normal scanner, they are usually too
short
> > >to be effective. You could use PROBE1K's extended delay features, but
> > >applying a lengthy delay can result in hearing less traffic. With
> TacScan,
> > >your odds of hearing a "response" to a dispatch are greatly improved.
> When
> > >you are searching a large number of frequencies, you will hear more
> > >activity, less dead air and enjoy better continuity. Find, identify and
> > >log those "new" frequencies quickly!
> > >
> > >TacScan assigns an active frequency to a priority position in the
> scanning
> > >list for a specified period of time. When and how the frequency is
> > >assigned as a TacScan frequency is based on the settings for TacScan.
You
> > >can set TacScan on "auto", or use PROBE1K's logging features, as a
> trigger
> > >so a frequency found active is assigned to the TacScan scanning list.
You
> > >can also manually assign an active, or last active frequency to the
> > >TacScan list right from the scanning screen. You will definately "hear
> the
> > >difference" with TacScan.
> > >
> > >Hyperbankstm - "Imagine having ten scanners sitting on your desk."
> reports
> > >John McColman from AOSC Journal. With just one simple keystroke, this
new
> > >feature immediately activates any combination of 99 scanning banks.
Each
> > >of the ten available Hyperbanks can be customized with a description so
> > >you can easily remember what each Hyperbank is designed to monitor.
> > >Hyperbanks allows the PCR1000 to become a tactical system, where it is
> > >quickly and easily reconfigured to the needs of the moment. Rather than
> > >switching through various screens, or deactivating and activating
banks,
> > >you only have to press one function key and go. Thus, with the ten
> > >function keys having separate bank selections, it is like having ten
> > >scanners available, all at the touch of one key.
> > >
> > >Let's say you have any number of banks setup to suit your interests.
> > >There's a bank for fire, another for media and another for local
> > >government. You can configure the "F1" key to activate these three
banks
> > >and describe it as "Fire" . Other banks could include your favorite
> > >frequency banks such as federal law enforcement, local and state law
> > >enforcement. Configure the "F10" key with these banks and describe it
as
> > >"Favorite Frequencies". When a major event occurs, press "F1" and the
> > >fire, media and local government banks are immediately activated. When
> > >everything is finished, press "F10" and you are back to your normal
> > >configuration.
> > >
> > >Hypersettingstm - In addition to PROBE1K's ability to "memorize" (save)
> > >various bank selections to one "Hyperbank key", PROBE1K provides the
> > >option of memorizing PROBE1K's "Settings" into the same key. A
Hyperbank
> > >key not only controls bank selections, but controls most of the
scanning
> > >operations, features and functions instantly.
> > >
> > >Hypergroupstm - Switch between any 10 "Groups" on the fly directly from
> > >the scanning screen! Assign any of the "F1" through "F10" keys to your
10
> > >favorite groups. Once scanning, pressing "Alt-H" provides a pick list
of
> > >groups. Or you can use the key combination of <Alt> and any of the
> > >preassigned "F" keys to go directly to a group.
> > >
> > >VFO Keys - This feature provides immediate access for those most
> important
> > >frequencies from the scanning screen or the manual tuner. Up to 10
> > >individual frequencies can be assigned to the "F1" through "F10" keys -
> > >called "VFO Keys". In addition to a frequency, each VFO key can store
the
> > >mode, tone, step rate and a description for each frequency. There's
also
> a
> > >handy VFO key pick list. Once a VFO key is pressed, the associated
> > >frequency is immediately tuned in the "Manual Tuner" where it can be
> > >changed, or stepped up or down based on the step rate you programmed
into
> > >the VFO key. Tone squelch control is also provided.
> > >
> > >Automark and Autolock - These features provide a method for easily
> > >identifying which frequencies are in use in your area. An excellent
tool
> > >for professional users responsible for frequency coordination and
> spectrum
> > >analysis. "Automark" automatically highlights (marks) frequency records
> on
> > >file based on the number of "hits" recorded in the log file. Coupled
with
> > >enhanced functions in the frequency viewer, you can copy or move either
> > >the marked or unmarked frequency records from a specific bank, or from
> the
> > >entire frequency file, to a different bank or group. Like "Automark",
> > >"Autolock" locks out active frequencies based on the number of "hits"
> > >allowing the program to concentrate more time checking on the remaining
> > >frequencies for activity.
> > >
> > >Extensive Frequency Management Tools Built In - Frequency file viewer
and
> > >editor provides expanding, contracting and locking columns for easy
> > >viewing. Column order of frequency data can be customized to suit your
> > >needs. Provides multiple sorting options for different ordering of
data.
> > >Incremental searching for fast lookups. Create subsets and print
> frequency
> > >data. Speed entry and instant duplication check for new frequency data.
> > >Direct access to frequency file and full screen frequency data editor
> > >accessible right from the scanning screen!
> > >
> > >One of the many unique frequency management tools is the "Compare /
Copy"
> > >function. This feature allows you to copy selected frequency data from
> one
> > >group into another. After the selected records are copied, they are
> > >compared to the other records in the current group. Those which are
> > >duplicated elsewhere in the group are "marked" (highlighted) and those
> > >which are new are unmarked. You can easily delete the marked records if
> > >you only want to view the new records, or delete the unmarked records
to
> > >see the duplicates. For those new records you wish to keep, you can
> > >reassign them to their appropriate banks. This make sharing frequency
> > >files with others a snap. You can "Copy / Compare" their frequency
files
> > >with yours making it easier to update and synchronize frequency files.
> > >Another benefit is being able to combine one group with another while
> > >eliminating unnecessary duplication.
> > >
> > >Imports PCR1000 "MCH" Files - PROBE1K allows you to import existing
> > >frequency data from Icom's software as well as the free data available
> for
> > >the Icom PCR1000 from Icom's free online "Frequency Finder" website.
> > >Import routine allows you to assign incoming data to specific banks
> within
> > >PROBE1K. Bank assignments can be left intact or frequency data can be
> > >consolidated into one bank.
> > >
> > >Imports FCC Data - PROBE1K utilizes FCC data better than any other
> > >software by importing more of it. Works with FCC Data from National
> > >Communications' "Mr. Scanner" CD ROM or any other FCC data that
conforms
> > >to "UFDBF" standards. Built-in FCC radio service descriptions and codes
> > >provided. Breaks down FCC data by putting each service type into an
> > >individual bank. Automatically fills in bank descriptions with FCC
radio
> > >service descriptions (when available) for easy selection of which radio
> > >services to scan. Uses latitude and longitude data (when available) for
> > >calculating distance from monitoring location to transmitter. Built-in
> > >radius search function allows you to import just those frequencies in
> your
> > >area. Frequencies which can't be tuned or are out of the tuning range
of
> > >the scanner are automatically eliminated. Duplicate frequencies are
only
> > >tuned once when scanning. Duplicate licensee records can be deleted by
> > >using a special "Dupecheck" function while scanning.
> > >
> > >Imports CSV Data - CSV data, a common data format, can be imported
> > >directly into PROBE1K. You control what data goes where. Also allows
> > >importing frequencies from a regular text file where frequencies are
> > >delimited by carriage returns and line feeds.
> > >
> > >Log all or specific frequencies / tones / DTMF data - Log is readily
> > >viewed and printed during scan session. Logging includes time and date
> > >stamp and options for logging individual or cumulative transmissions of
> > >DTMF data. Accumulated air time and average signal strength included.
> > >Immediate access tot he log directly from the scanning screen and
> > >instantly tune a logged frequency. A "Minimum Airtime" setting
eliminates
> > >logging frequencies due to short squelch openings and repeater delays
> that
> > >may otherwise hold the frequency open.
> > >
> > >More on-line data for active frequencies - Scanning screen includes
> > >licensee name, address, city, state, county, radio service type and
> > >description, callsign, transmitter latitude, longitude, group name, log
> > >file name, bank number and bank description.
> > >
> > >More on-line status indicators - Status indicators and data include
> > >scanning speed, current active frequency, CTCSS / DTMF codes, signal
> > >strength, log, alarms, priority, delays, current time, SmartScan,
> > >SmartBank, and an active log of the most recent frequency activity.
> > >
> > >Unique "Lite Bar" and "Manual" tuning Functions - "Direct access
on-line
> > >tuning" from both the frequency and log file viewers provide immediate
> > >tuning of highlighted frequency or log record. Manual mode provides
> > >variable tuning directly from scan screen; acts like a "tuning knob".
> Tone
> > >control, signal strength, and DTMF readout included. You can even
toggle
> > >the PCR1000's "ATT" switch for deattenuating the signal.
> > >
> > >These are just a few of the many features PROBE1K has to offer. Other
> > >features include:
> > >
> > >Individual "Filter" and "ATT" settings can selected for each frequency
> > >record
> > >
> > >
> > >"Templock" for nuisance transmissions with variable time control
selected
> > >on the fly while scanning
> > >
> > >
> > >"Templock Monitor" temporarily locks out a frequency that may be the
> > >result of "stuck key" or otherwise is interfering with the regular
> > >scanning process
> > >
> > >
> > >Variable monitoring time limit
> > >
> > >
> > >Selectable priority bank including a variable sample rate for focusing
on
> > >the most important frequencies
> > >
> > >
> > >Dual delay "global" timers as well as a "Custom Delay" for an
individual
> > >frequency
> > >
> > >
> > >Export frequency or log data to ASCII text file, CSV file, mapping file
> > >(frequency data only) and "UFDBF" file
> > >
> > >
> > >Visual Alarmstm allows you to assign a frequency with any one of nine
> > >customized visual and audio alarms. When an "alarmed" frequency goes
> > >active, the name appears in the activity window in its specially
assigned
> > >color?
> > >
> > >
> > >Delete duplicates function allows you to automatically create search
> files
> > >for a specified range of frequencies while leaving out any frequencies
> > >which are already in a selected group's frequency file
> > >
> > >
> > >Enhanced "Frequency Dupe Check" allows you to view a duplicate
frequency
> > >record when adding new ones
> > >
> > >
> > >"Total Frequency Count" provides a total count of all frequencies being
> > >scanned and frequencies per bank
> > >
> > >
> > >Display colors can be changed and monochrome is also supported
> > >
> > >
> > >Display up to 50 lines of data on screen at once for larger frequency,
> log
> > >and history lists
> > >
> > >
> > >Four different types of scan indicators including a "scan speed"
> indicator
> > >
> > >
> > >Signal strength display provides actual readings from receiver giving
you
> > >a wider range of numbers
> > >
> > >
> > >Compare all these features with any other software and you'll see why
> > >PROBE1K is the best scanning software for the Icom PCR1000.
> >
> >
> >
> >
> > --__--__--
> >
> > _______________________________________________
> > PCR-1000 Digest
> > Post Address
> > [email protected]
> > Subscribe / Unsubscribe
> > http://mailman.qth.net/mailman/listinfo/pcr-1000
> > Mailman FAQ and Users Guide
> > http://mailman.qth.net/faq.htm
> >
> >
> > End of PCR-1000 Digest
>
> ______________________________________________________________
> PCR-1000 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:[email protected]