[PCR-1000] PCR-1000] GNPDB tuning the PCR-1000 IT WORKS

[pcr-1000@mailman.qth.net]

I just got the RX control for GNPDB working with the PCR-1000 and the GNPDB=20=
=20
shortwave database program and can tune the PCR by clicking on one of the=20
thousands of HF freq's in the database with frequency, country, language,=20
start/stop times, program, lat/long, target area,  and active station=20
filtering

anybody needing help email me directly and I will work you thru it but here=20
is how to do it

download the GNPD program and the IRLG database (they will email you a=20
password)  <A HREF=3D"http://www.ilgradio.com/ilgradio.htm">http://www.ilgra=
dio.com/ilgradio.htm</A>
, follow the instructions and set them up and then download RX control for=20
GNPDB <A HREF=3D"http://www.qsl.net/dg5dbz/gnpdb/gnpdb_ger.htm">http://www.q=
sl.net/dg5dbz/gnpdb/gnpdb_ger.htm</A>
in the same directory. erase the data in the RX control  ini file and paste=20
this in instead (put your PCR port number in where listed) .=20

; Config-File for RX-Control
; umbenennen zu rxcontrol.ini

; Beispielkonfiguration f=FCr den Empf=E4nger PCR 1000

ComPort=3D1
Baudrate=3D9600

; PCR1000: Radio on
Pre=3DH101

; PCR1000: Set Volume to 60%
Pre2=3DJ4060

; PCR1000: Frequency Input=20
Freq=3DK0

; PCR1000: 10 Digits
TotalLengthOfFrequency=3D10

; PCR1000: sets AM at 6kHz BW
AfterFreq=3D020100

; Output of Frequency will be in Hz
; Ausgabe der Frequenz soll in Hertz erfolgen
Hz=3DHz

; Output of Frequency will be in kHz
; Ausgabe der Frequenz soll in Kilo-Hertz erfolgen
;kHz=3DkHz

; PCR1000: Switch Squelch off
Post=3DJ4100
PCR1000: Autoupdate off
Post2=3DG300


;PCR1000: 5s
WatchdogTimer=3D5000
;PCR1000: set Volume to 60%
;PCR1000: this could be any other command, the main thing is to keep the=20
radio alive
WatchdogString=3DJ4060



you also have to paste this text in the GNPDB ini file which is in the=20
windows directory (search for it) and add it in just below "settings"

ApplicationName=3DAloha Oi Software CopyData: #0


steve


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---