[PCR-1000] CWGet

[Harry Flaxman]

Dave,

That's exactly what I see.  I will try the burst filter and see if I have
any luck with the signals I do get.  I am about to install a new antenna for
the lower bands anyway, so I may wait until I get the antenna out and up
before giving the program another shot.

Thanks!

Harry


On 30-May-2002, Dave wrote:

> Harry
> Is this what you see
>
> CwGet  V1.25
> (c) 1999-2002 Sergei Podstrigailo, UA9OSV
> Use mouse to select sound band and detector
> threshold.
> #
>
> This is the normal welcome message when you start the program. I clear
> this
> and then start receiving and the messages appear in this window. The
> window
> above should show the signal sound spectrum with several peaks if you have
> a
> busy part of the band. If you have nothing there then your connection to
> the
> radio is suspect.
> Main filter 140
> burst filter 200 works for me
> red line in window below shows threshold setting. this should be close to
> middle of signal. Alternatively click autothresh and it follows the signal
> level.
> the program appears to mute my sound card output so i have to use the
> radio
> speaker to check for signals. The program is sensitive to noise but i work
> on cleaning up the signals.
>
> hope this helps
>
> dave