[PCR-1000] CWGet

[david_a_stewart]

Harry
Is this what you see

CwGet  V1.25
(c) 1999-2002 Sergei Podstrigailo, UA9OSV
Use mouse to select sound band and detector
threshold.
#

This is the normal welcome message when you start the program. I clear this
and then start receiving and the messages appear in this window. The window
above should show the signal sound spectrum with several peaks if you have a
busy part of the band. If you have nothing there then your connection to the
radio is suspect.
Main filter 140
burst filter 200 works for me
red line in window below shows threshold setting. this should be close to
middle of signal. Alternatively click autothresh and it follows the signal
level.
the program appears to mute my sound card output so i have to use the radio
speaker to check for signals. The program is sensitive to noise but i work
on cleaning up the signals.

hope this helps

dave



----- Original Message -----
From: "Harry Flaxman" <hflaxman@neb.rr.com>
To: <pcr-1000@mailman.qth.net>
Sent: Thursday, May 30, 2002 9:18 AM
Subject: Re: [PCR-1000] CWGet


> Dave,
>
> Thanks, will give it a shot.  So far, I have been able to get nothing.
> There is a # sign in the middle of the program screen that looks like it's
a
> command prompt waiting for input.  I can get that to disappear by opening
my
> buffer.  I'm assuming this is what the program is waiting for, no?
>
> Harry
>
>