[PCR-1000] re:pcr-1000 -----------> XP and stock icom software

Wed, 20 Mar 2002 00:35:49 -0600

Hi All
Marks advise works great after months of trying to get Icom to run on XP I turned off the tool bar and that served as a fix.  I now am running with out any more problems.  Thanks again Mary for your info

73
Don Schaefer
Communication Specialist
Spring, Texas
E-mail: [email protected]

[email protected] wrote:

> What you got with the GPF error is a back-rev'd DLL.
>
> Icom's software should install all DLL files into \..\system folder, not \...\system32. Check too, any 16-bit software installed after the PCR's. Be sure Icoms 16 bit DLL, OLE2DISP.DLL, did not over write the 32 bit version. For the full report on this DLL hell, check the pcr-1000 archives back through 1999.
>
> Check a particular DLL at, http://support.microsoft.com/servicedesks/fileversion/dllinfo.asp?sd=MSDN
>
> Stu, k2qde
>
> [email protected] wrote:
> > Dave - I posted this a while back and it seemed to help a few other list
> members -
>
> http://mailman.qth.net/pipermail/pcr-1000/2002-February/000234.html
>
> The recent thread concerning problems running the Icom supplied PCR1000
> software under Windows XP prompted me to install it and give it another
> try.  I'm wondering if this is the error people are seeing - APPLICATION
> ERROR - PCR1000 caused a General Protection Fault in module OLE2DISP.DLL
> at 0001:0B20?
>
> If so, I may have a quick workaround for you.  The problem (for me at
> least) seems to be related to whether or not the tool bar is selected to
> be displayed.  Since it is on by default, there is no way to shut it off
> within the program by using the Option menu.  If you open up the
> PCR1000.ini file with a text editor, edit the line in the [COMMON]
> section (or add it if it's not there) so that it reads TOOLBARSHOW=0 and
> save the file, you should be able to launch the program without error.
> This resolved the issue for me.  Keep in mind that if you then try to
> re-enable the toolbar with the Option menu choice, you see that the
> program fails again - I can live without the toolbar!
>
> Hope this helps,
> Mark
>
> --__--__--
>
> Message: 1
> From: [email protected]
> Date: Sun, 17 Mar 2002 12:31:57 EST
> To: [email protected]
> Subject: [PCR-1000] re:pcr-1000
> Reply-To: [email protected]
>
> will the radio work with the stock software and windows "XP" ?
>
> i keep getting application error when i load the software
>
> using "xp"
>
> tax,
> de dave
>
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000
>
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000