[PCR-1000] PCR front panel

Sat, 02 Feb 2002 20:19:48 +0000

I believe the Euro to dollar conversion was 92 cents to one Euro
yesterday, one February.  In other words, about one hundred dollars US
cost for this.      Cliff K7RR

Colin Martin wrote:
> 
> Hi
> Details of front panel available as follows:
> 
> ok Colin... yes the kit is available.
> The Kit contains:
> -Two PCB (PIC board and Keyboard)
> -a programmed PIC 16F876
> -an Mecanical encoder
> -all the other materials (LCD display,resistors, connectors, capacitors,
> voltage reguletor etc.)
> The mecanical enclosure is not available
> The KIT cost is 90 euro +15 euro for shipping in Europe
> The KIT assembled and tested  for 100 Euro
> Also the only programmed PIC is available for 40 Euro.
> 
> Thanks
> Giuliano
> giuliano [[email protected]]
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Richard John Manson
> Sent: 01 February 2002 00:09
> To: [email protected]
> Subject: RE: [PCR-1000] PCR1000 servicing from Icom
> 
> Hi all,
> 
> I have had the same problems with deafness but my set also displayed all
> the
> other signs of EEprom corruption, i.e the run away AFC etc. I sent mine
> to
> Icom Australia on the 10th of December and am still waiting to get it
> back!
> I called them three weeks ago and was told that is was giving them a
> headache! but no explanation why or when I may see it back!
> 
> 73,
> Richard Manson [GM1PWS exZL2TNA]
> Jakarta, Indonesia
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Mark L. Hammond
> Sent: Thursday, 31 January 2002 20:18
> To: [email protected]
> Subject: [PCR-1000] PCR1000 servicing from Icom
> 
> Well, as a direct result of trying out the WXSAT stuff, I've determined
> that my PCR1000 is very, very deaf.  The receive of the wx sats is
> horrible.  The sensitivity is just not up to par.
> 
> Now, before the flames start about what a knucklehead I am, and how I
> don't
> know how to operate it, let me share some information with you :)
> 
> 1) I have a 10 cross-element RHCP directional array with computerized
> az/el
> control as an antenna (cut for 144 MHz, but it has lots of gain at 137).
> 
> 2) I have a Kenwood TS-790A and an Icom-706 to use as comparison
> receivers.  They were getting quite good signals, when the PCR-1000
> couldn't even hear the wxsats--same antenna, mind you.
> 
> 3) I've been doing digital satellites since 1990, so grabbing a few
> satellite images is really no big deal
> 
> 4) no, the PCR-1000 attenuator isn't ON ;-)  Turning it on makes the
> unit
> go from deaf to deaf AND dumb!
> 
> 5) local ham radio repeaters give about an S3-4 signal, while the ham
> rigs
> are S9+20-60.
> 
> I haven't used it much at all (bought it for AO-40 satellite work), and
> I'm
> not sure it has ever worked right, but it seems much worse than I ever
> recall (I hadn't used it for months, no antenna connected during that
> time).
> 
> Okay, that having been said--I just boxed up my PCR1000 and mailed it to
> Icom for warranty repair.  Has anybody on the list seen something like
> this?  Or had to send their unit back to Icom for repairs?  How was
> their
> repair service?  Just wondering what kind of receive sensitivity others
> are
> seeing....the tech. specs are "okay" meaning, I don't expect to do EME
> with
> it.  But by golly it should hear the wxsats on a directional array!
> 
> 73,
> 
> Mark L. Hammond  [N8MH]
> 
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000
> 
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000
> 
> _______________________________________________
> PCR-1000 mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/pcr-1000