[PCR-1000] Larry's usb to serial port converter

Thu, 25 Apr 2002 06:57:01 -0400

Yes it was on 3 on the sony and 2 on the IBM and both times it starts and
then it stops. by hitting the power button on the program it will restart
for about 30 seconds then the pop up message comes up and it stops working.
it works fine with talk pcr, no problems at all.  ivan

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of mikea
Sent: Wednesday, April 24, 2002 7:01 PM
To: [email protected]
Subject: Re: [PCR-1000] Larry's usb to serial port converter

On Wed, Apr 24, 2002 at 03:20:23PM -0400, Ivan Mothershead wrote:
>
>
> I bought a Larry's usb converter that Tim Edwards recommended and it works
> great, except now I have my pcr-1000 and the pcr software does not see the
> connection.  It works, I can tune the radio, then up pops a screen saying
> the com port 2 is not connected and the pcr-1000 software freezes until I
> click the ok button on the screen saying its not working, while it is
> working.  when I click the ok button, it does stop working.  what gives?
is
> this a pcr-1000 software problem, or did I buy the wrong usb converter
from
> Larry?  Ivan [email protected]

Are you sure that the USB port is being seen as COM2? Try COM3
or COM4; my serial-to-USB adapter shows up as COM3. And no, I
haven't tried it with my PCR-1000, either.

--
Mike Andrews
[email protected]
Tired old sysadmin since 1964
_______________________________________________
PCR-1000 mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/pcr-1000