[PBARC] FT4 Setup

[JJ Knight]

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: pbarc-bounces at mailman.qth.net <pbarc-bounces at mailman.qth.net> on behalf of E Glenn Wolf <glenn at arwolfpack.net>
Sent: Monday, April 22, 2019 4:16:14 PM
To: PBARC Reflector
Subject: [PBARC] FT4 Setup



To join the FT4 test group and participate in one or more upcoming “mock contest”
practice sessions, follow these steps to install and configure a release candidate for
WSJT-X 2.1.0:
1. Download the installation package from a link to be provided.
2. Install the program in the usual way for your operating system. To avoid conflict
with your normal operation, you may wish to use a different installation directory
from that used for WSJT-X 2.0.
3. Start the program as you normally would for FT8.
4. From the Configurations menu select FT8 | Clone (or Default | Clone).
5. Rename the resulting new configuration to FT4, and select the new configuration.
6. Select FT4 from the Mode menu.
7. On the File | Settings | Frequencies tab, right-click any line in the Working
Frequencies table and press the Reset button. This action will pick up the
recommended working frequencies for FT4.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/pbarc/attachments/20190425/3bf8c433/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FT4_Protocol.pdf
Type: application/pdf
Size: 383466 bytes
Desc: FT4_Protocol.pdf
URL: <http://mailman.qth.net/pipermail/pbarc/attachments/20190425/3bf8c433/attachment-0001.pdf>