[PaQSO] Kd8mq digital modes - n1mm question

[John Bednar]

John,

In the Callsign box type  PSK31  and press Enter. Other valid Callsign box
mode string commands are SSB, CW, RTTY, FM, USB, LSB. To use RTTY & PSK you
need to have the contest setup Mode selector set to Mixed+Digital.

You can also left click on a band in the PSK column of Band Buttons (left
edge of the Entry window). If you interfaced a radio, don't forget to set
the Config, Mode Control tab, right side of the window "Mode sent to radio"
for RTTY and PSK. This determines which mode string will be sent to the
radio when you change to PSK and RTTY.

John, K3CT

-----Original Message-----
From: PaQSO [mailto:paqso-bounces at mailman.qth.net] On Behalf Of John Myers
Sent: Friday, October 09, 2015 11:42 PM
To: paqso
Subject: Re: [PaQSO] Kd8mq digital modes - n1mm question

I'm using N1MM w/ fldigi.  How do I switch to PSK mode in the n1mm entry
window? 

RTTY, CW, ssb work fine when I enter them into the window.

I've downloaded the manual, but haven't been able to answer this. What am I
doing wrong?

Thanks, 

John, KD8MQ/3


On October 9, 2015, at 22:41, John Myers <tvguy07 at gmail.com> wrote:

Hi,

After the net, I did some more fussing with fldigi. Figured out what I was
doing wrong. So,  I think I can now get it operational in time for the
contest.

73,


John, KD8MQ
______________________________________________________________
PaQSO mailing list
Home: http://mailman.qth.net/mailman/listinfo/paqso
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:PaQSO at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html