[PaQSO] N1MM Scoring Bug?

[Mark Schreiner]

I noticed this but I thought it worked out okay.  For example, mine showed
the following multipliers in the Scoring Window:

Total   Both    565    1724  117   2    (Band, Mode, QSOs, Pts, Mul, Mt2)

Additionally at the bottom of the input main input window (I have two up
for two radios) it shows 565/117/2.

I'm sure the last "2" is for the first time you work somebody in EPA and
WPA which will be a new county and a new ARRL Section, as Bruce pointed
out.

When I parse out the multiplier counts for the summary sheet submitted to
NARC I have to break it out into PA Counties, ARRL/CRL Sections and DX.
So, assuming I start with 117 + 2 (from the above), or a total of 119
Counties, I had a clean sweep of PA counties (67) which is also shown on
the "Other" tab for the multipliers screen.  This leaves 52 others to be
accounted for.  ARRL/CRL sections are shown in the Multipliers window with
the Sections tab as 51 of 84, plus there is one DX, so it seems like it
works out okay.  Actually, if you go to the Countries tab in the
multipliers window it shows how many different countries you did work but
N1MM was correctly programmed to only give a multiplier for the first DX.

I think it is okay.  Did you do a "Tools, Rescore Current Contest" at all?

Mark, NK8Q


On Sun, Oct 20, 2013 at 9:42 AM, Goody K3NG <goody.k3ng at gmail.com> wrote:

> If I manually count up the mults in the Multipliers window, I get 49
> sections + 56 counties + 1 DX = 106 mults.  I see 477/105/2 in the status
> bar (105 + 2 = 107).  The score summary sheet doesn't break out counties,
> sections, and DX but it is using 107 mults in the scoring.
>
>
> On Sun, Oct 20, 2013 at 9:32 AM, Bruce Manning <bmanning at zitomedia.net
> >wrote:
>
> > I noticed this also, when I questioned it someone told me it is because
> > you get 2 multipliers for these, one for the county and one for the ARRL
> > section.
> > 73
> > Bruce NJ3K
> >
> > -----Original Message----- From: Goody K3NG
> > Sent: Sunday, October 20, 2013 9:19 AM
> > To: paqso
> > Subject: [PaQSO] N1MM Scoring Bug?
> >
> >
> > It seems to me the N1MM program (version 13.9.1) is adding two additional
> > mults in the scoring summary sheet.  It looks like it's duplicating EPA
> and
> > WPA.  I also notice it in the status bar where it displays a /2 for the
> two
> > additional mults.
> >
> > Anyone else see this?
> >
> > 73
> > Goody
> > K3NG
> > ______________________________**______________________________**__
> > PaQSO mailing list
> > Home: http://mailman.qth.net/**mailman/listinfo/paqso<
> http://mailman.qth.net/mailman/listinfo/paqso>
> > Help: http://mailman.qth.net/mmfaq.**htm<
> http://mailman.qth.net/mmfaq.htm>
> > Post: mailto:PaQSO at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> PaQSO mailing list
> Home: http://mailman.qth.net/mailman/listinfo/paqso
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:PaQSO at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>