[PaQSO] Another N1MM question

[John Bednar]

Rob,

To set the program mode to RTTY or PSK type RTTY or PSK in the Callsign box
and press Enter. The digital mode will be logged correctly and displayed in
the Log window.

If you have a radio interfaced, set the Config, Mode Control tab, RTTY and
PSK mode selectors correctly. This will send the correct digital mode to the
radio.

When you switch to a non-digital mode enter CW or SSB in the callsign box
and press Enter.

John, K3CT


-----Original Message-----
From: paqso-bounces at mailman.qth.net [mailto:paqso-bounces at mailman.qth.net]
On Behalf Of rnygren at epix.net
Sent: Monday, October 14, 2013 8:14 PM
To: paqso
Subject: [PaQSO] Another N1MM question

Couldn't find the answer in the documentation, and perhaps others can
benefit by my asking this here.

I worked one station on RTTY and two on PSK.  (Op mode for RTTY was LSB and
PSK was USB). Unable to change the mode to either RTTY or PSK. Editing the
point value to 2 points works OK. I logged the QSO's as W3ZGD/RTTY  (as an
example.)

Was there any discussion that I missed? How best to log?

Thanks!

Rob N3RN (KA3EEO SUS)
______________________________________________________________
PaQSO mailing list
Home: http://mailman.qth.net/mailman/listinfo/paqso
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:PaQSO at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html