[PaQSO] QSL Card ideas; lets try it again

Mon, 20 Oct 2003 13:29:37 -0400

Yep, that's the one.  I made a dual sided card with it.  Front had a 
picture of me at the operating position with call, 2002 PQP and Clinton 
County.  The picture covered the entire front surface.  The back had 
this info plus the QSO block but no picture.  Since QSLMaker does not 
support two sided I made two separate cards and used the same card 
positioning for both.  I did the front with a border but the back 
without one and a plain uncolored background.  I printed the fronts, 
flipped the sheets over and printed the backs and cut out the cards 
based on the front  The registration between the front and back is 
fine.  Since I only ended up needing about 20 cards, this was the most 
economical way for me to go.

73,
mark N3GNW

John Myers wrote:

>Oops! Blame it on Monday!
>
>http://www.hfradio.org/wb8rcr/QSLMaker.html
>
>
>----- Original Message ----- 
>From: "Paul F. Ryan" <[email protected]>
>To: "John Myers" <[email protected]>
>Sent: Monday, October 20, 2003 11:29 AM
>Subject: Re: [PaQSO] QSL Card ideas
>
>
>  
>
>>Hi John,
>>
>>Did I miss it, or was there supposed to be a link in here somewhere???
>>
>>Paul :)
>>
>>John Myers wrote:
>>
>>    
>>
>>>Hi Mark,
>>>
>>>Here's the link you're probably thinking about.
>>>
>>>John
>>>----- Original Message -----
>>>From: "Mark Kempisty" <[email protected]>
>>>To: "John Myers" <[email protected]>
>>>Cc: "pqp" <[email protected]>
>>>      
>>>
>>-- 
>>Paul F. Ryan
>>Lehigh University Computing Center
>>EWFM 8B, Rm 294
>>610-758-5852 ( [email protected] )
>>
>>
>>    
>>
>
>_______________________________________________
>PaQSO mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/paqso
>
>
>  
>