[Packet] Packet and HTX-252

Thu, 7 Nov 2002 11:12:34 -0600

You need a resistor inseries with the PTT like for a IC-2 HT but I don't know what value resistor. That might be in the HTX-252 manual which I don't have.

73, Jerry, K0CQ

---------- Original Message ----------------------------------
From: "Justin W. Pauler (W5JWP)" <[email protected]>
Reply-To: [email protected]
Date:  Wed, 6 Nov 2002 13:21:43 -0600

>Hello everyone.
>
>I recently aquired an HTX-252 at a very, very cheap price. I would like to
>use this radio with my Kantronics KPC-2 for APRS work. However, I have tried
>and tried and tried to get the pinouts correct but nothing seems to work.
>Can anyone shed some light on this issue?
>
>The TNC seems to have the following pin layout:
>
>	1 tx audio
>	3 ptt
>	5 rx audio
>	6 ground
>
>The Radio has the following layout:
>
>	1 mic audio AND ptt
>	4 5 vlt
>	7 ground
>
>While this looks very simple, it is rather complicated. If I touch Pin 3 on
>the TNC to pin 1 on the Radio, it sits there, waiting for the TNC to key the
>radio (which works!).
>
>However, if I touch Pin 1 on the TNC to Pin 1 on the Radio, it keys the
>radio no matter what. It stays an open key.
>
>Now, if I put all three wires together at once, it open keys the radio and
>stays open, but I can type something in the TNC and it will transmit it. I
>can hear the tones going out.
>
>Does this mean I need some type of resistor on the TX audio line to not open
>unless there is audio present, and if so, what value would you suggest?
>
>Any help would be appreciated and any other comments you have about using
>this radio in a packet enviromnent. Thanks in advance.
>
>--
>Justin W. Pauler, W5JWP
>ARRL OES, Louisiana Section
>E-Mail: [email protected]
>WWW: http://www.w5jwp.org
>
>_______________________________________________
>Packet mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/packet
>List Administrator David Barlitt (KF4AWU) mailto:[email protected]
>