[Packet] PK-232

Sat, 02 Mar 2002 02:21:47 -0400

Please be sure to give the darn PK-232 aat least 13.0 to 13.5 volts,
it will not reset properly on power up if you do not give it the
proper voltage. 12 volt wall warts will not work.

Been there done that, have the scars..

73

Terry

----------
>From: "Doug Younker" <[email protected]>
>To: <[email protected]>
>Subject: Re: [Packet] PK-232
>Date: Sat, Mar 2, 2002, 2:08 AM
>

>That or scrounge up a wall wart 500 ma should be large enough. Go to
>www.packetradio.com to find the pinouts to build your own cables.--73 N0LKK
>----- Original Message -----
>From: "Paul Cavnar" <[email protected]>
>To: <[email protected]>
>Sent: Friday, March 01, 2002 7:01 PM
>Subject: Re: [Packet] PK-232
>
>
>: Hi Jonathan -
>:
>: > I just recently acquired a PK-232 without a pwr sply, and a radio hookup
>: > cable...
>: >
>: > I have 2 quesions.... what is the amps, or milliamps that the tnc draws
>: > on 13v???
>:
>: The manual says:  700ma
>:
>: > And where can I purchase radio hookup cables??
>:
>: You can buy them from MFJ on-line.  You can also buy them from Buck
>: at:  http://www.packetradio.com/2ndpage.htm
>:
>: He also has the diagrams there for DIY.
>:
>: 73, Paul - NN7B
>:
>: _______________________________________________
>: Packet mailing list
>: [email protected]
>: http://mailman.qth.net/mailman/listinfo/packet
>: List Administrator David Barlitt (KF4AWU) mailto:[email protected]
>
>_______________________________________________
>Packet mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/packet
>List Administrator David Barlitt (KF4AWU) mailto:[email protected]