[OKDXA] ELECRAFT KPA1500

[ne5sd.steve at gmail.com]

I try to limit operations to 40 to 50W max.  As Tim said, FT8 is for low power.

If you are operating high power, near-by hams may be blocked.

73

-Steve.
NE5SD

-----Original Message-----
From: okdxa-bounces at mailman.qth.net <okdxa-bounces at mailman.qth.net> On Behalf Of John Geiger
Sent: Thursday, May 26, 2022 12:21 PM
To: Oklahoma DX Association <okdxa at mailman.qth.net>
Subject: Re: [OKDXA] ELECRAFT KPA1500

Because the DX can't always hear me with 100 watts!

73 John AF5CC

On Thu, May 26, 2022 at 3:03 PM Tim Duffy <k3lr at k3lr.com> wrote:

> The problem is this.... FT8 is a LOW power mode!
>
> Why is ANY station using more than 100 watts on FT8?
>
> 73
> Tim K3LR
>
> -----Original Message-----
> From: okdxa-bounces at mailman.qth.net 
> [mailto:okdxa-bounces at mailman.qth.net]
> On Behalf Of Roger Simpson
> Sent: Thursday, May 26, 2022 10:59 AM
> To: Oklahoma DX Association
> Subject: Re: [OKDXA] ELECRAFT KPA1500
>
> Gary:  I have an Amertiron 1306 aslo.  I have had a similar problem to 
> yours with the 1306.  Namely it will just NOT support FT8 at the high 
> duty cycles that FT8 uses. In my case I did NOT burn up the the amp . 
> But the amp was not suitable for FT8 since it would shut down on its 
> own after a few minutes of running FT8 at a power level of about 300W.
>
> I bought an ACOM A2100, which uses a vacuum tube final. The ACOM uses 
> a 4CX1000. I have been using the ACOM now for about six months. It is holding
> up OK on FT8.   FT8 has a much higher duty cycle than CW or SSB or RTTY.
> With FT8 you are running “full power” solid for 15 seconds half of the 
> time. You only get 15 seconds of rest for the linear to cool down.
>
> I think the Ameritron 1306 needs better cooling such as a bigger fan 
> with more air circulating.  I personally don’t know if there is a 
> solid state amp that is suitable for FT8 or not.  I don’t know about the Elecraft amp.
>
>  I notice that big contest super-stations, such as K3LR, are using 
> vacuum tube amps. In K3LRs case they are homebrew amps. Vacuum tube 
> amps have to warm up, they use semi-obsolete parts, and they may have 
> loud fans, but they hold up with high “brick on key” duty cycles.
>
> 73    Roger   K5RKS
>
> ================================================
>
> Sent from Mail for Windows
>
> From: garylm at kiamichiwb.org
> Sent: Wednesday, May 25, 2022 9:05 PM
> To: OKDXA at mailman.qth.net
> Subject: [OKDXA] ELECRAFT KPA1500
>
>
>
>
>
> HAS ANYONE HAD ANY  DEALINGS WITH AN ELECRAFT KPA1500 SOLID STATE AMP?
> HOW THEY HOLD UP USING DIGITAL MODES,  I HAVE HAD AN AMERITRON ALS1306 
> AND IT WOULD NOT HOLD UP TO WORKING FT8 KEPT LOOSING FINALS.
> WONDERING IF THE KPA1500 HAD THE SAME PROBLEMS.
> BOB AT ELECRAFT THANKS THEY WILL HOLD UP USING DIGITAL MODES,  WOULD 
> LIKE TO HEAR FROM SOMEONE WHO HAS USED THEM  WORKING STATIONS DAILY.
> THANKS
> GARY
> WQ5R
>
>
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
______________________________________________________________
OKDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/okdxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:OKDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html