[OKDXA] Tower installation

[dan edwards]

 55g is BAD ASS stuff...at 100# per section, it oughtta be, huh? k5lc and i split a biz twr take down..
had 90' of it up in longview, only guyed twice, mostly philystran; pair of kt 34xa's on it and shorty 40 12' above top tribander...made top ten low power in arrl, both modes, once upon a time..80's....finally gave up; too much noise in the suburbs..
73, w5xz, dan

    On Wednesday, February 24, 2021, 01:07:17 PM CST, Mark Chouinard <chouinard.ok93 at gmail.com> wrote:  
 
 I happen to have an 80' Rohn 55 with K7NV prop pitch motor and controller.
Just brought it down yesterday.  Motor should work, but might need service
before going back up. 20' mast and heavy turnbuckles, but will need new
Phillystran.

Was thinking of using for my own project, but I have other options.  This
one is certainly capable of supporting big aluminum.

Give me a call if interested.

73,
Mark - K5YAC
918-237-0844

On Wed, Feb 24, 2021, 10:11 Daniel Hileman <wo5wo73 at gmail.com> wrote:

> Any suggestions on tower installers in the OKC area? I’m trying to make
> some decisions on  station improvements, I’m thinking about a 70’  Rohn 25
> tower with a 40m yagi, but if I can’t find someone with experience in the
> area it changes some of my decisions. Thanks!
>
> 73
> Dan WO5WO
>
>
>
> Sent from my iPhone
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
OKDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/okdxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:OKDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html