[OKDXA] FT8 F/H question

[John Geiger]

Was able to add the F/H frequencies to the selection list in WSJT-X.
Thanks everyone for their help

73 John W5TD

On Fri, Feb 28, 2020 at 2:38 PM Jeff Martin <jeffmartin at valornet.com> wrote:

> John:
>   I think you could do that under the "configurations" tab. Create a config
> named say "VP8PJ", input the specified frequencies, select that config when
> you are just chasing VP8PJ... Should work... I don't do it that way, I just
> spin the dial...
>
> 73,
> Jeff - K5WE
>
>
> -----Original Message-----
> From: okdxa-bounces at mailman.qth.net [mailto:okdxa-bounces at mailman.qth.net]
> On Behalf Of John Geiger
> Sent: Friday, February 28, 2020 2:12 PM
> To: Oklahoma DX Association
> Subject: [OKDXA] FT8 F/H question
>
> For those of you who know WSJT-X better than I, I have a questions:
>
> Many F/H DX operations on FT8 are not on the traditional FT8 frequencies
> entered into the software.  In the WSJT-X program, is there a way to change
> the frequency using the software when doing rig control?  It would be nice
> to change to the F/H frequencies when chasing DX and operating remotely.
>
> 73 John W5TD
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>