[OKDXA] FT8 F/H question

[John Geiger]

Hi Tom,

Thanks for the reply, that is what I use also for F/H.  Suppose I am on
18.100 running FT8 and VP8PJ shows up on 18.095.  Is there a way to switch
to 18.095 just using the WSJT-X software?

73 John W5TD

On Fri, Feb 28, 2020 at 2:17 PM Thomas Webb <tmwebb at cox.net> wrote:

> John,
>
>      I use 'Fake It' vs 'Rig'.  Works fine.
>
> Tom, WA9AFM
>
> -----Original Message-----
> From: okdxa-bounces at mailman.qth.net [mailto:okdxa-bounces at mailman.qth.net]
> On Behalf Of John Geiger
> Sent: Friday, February 28, 2020 2:12 PM
> To: Oklahoma DX Association
> Subject: [OKDXA] FT8 F/H question
>
> For those of you who know WSJT-X better than I, I have a questions:
>
> Many F/H DX operations on FT8 are not on the traditional FT8 frequencies
> entered into the software.
> In the WSJT-X program, is there a way to change the frequency using the
> software when doing rig
> control?  It would be nice to change to the F/H frequencies when chasing
> DX and operating remotely.
>
> 73 John W5TD
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>